Granite Fitting Installation in Sikkim
Replacements and patch repairs go wrong when the new tile is laid at a different height to the old floor. We level the transition so the repair does not become a permanent eye-catcher. Work in Sikkim is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Free inspection and test patch on a hidden area
- Acid-proof masking of walls, skirting and fittings
- Damage correction by grinding where required
- Progressive diamond polishing at controlled speed
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in granite fitting installation
- Progressive diamond polishing at controlled speed
- Grey mop haze and residue stripping
- Stain treatment for tea, oil and hard water
- Optional sealer, silicate or nano coating
- Gloss and whiteness checked with you
- Free inspection and test patch on a hidden area
- Acid-proof masking of walls, skirting and fittings
- Damage correction by grinding where required
What each surface needs
| Problem | Cause | Fix |
|---|---|---|
| Grey overall haze | Mop residue and soap film | Strip, then polish |
| Dull traffic lanes | Surface wear in walkways | Diamond polish those lanes to match |
| Yellow or brown patches | Oil, rust or water seepage | Poultice, then polish |
| White etch marks | Acid or lemon contact | Fine grind and re-polish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Masking with acid-proof covering
- Residue stripping and stain treatment
- Progressive diamond polishing
- Handover with a whiteness comparison
Granite Fitting Installation rates in Sikkim
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance polish | Rs 5-15 per sq ft | Light dulling |
| Diamond polish | Rs 15-25 per sq ft | Haze and scratch lanes |
| Deep polish with correction | Rs 25-35 per sq ft | Etching, patches, heavy wear |
| Sealer or coating | Quoted after inspection | Kitchens, entries |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Tiles or marble: what each one needs
| Tiles (vitrified, ceramic) | Marble | |
|---|---|---|
| What dulls | Surface residue and micro-scratches | Worn polished layer, etching |
| Restoring it | Deep clean, surface refine | Grinding and diamond polishing |
| Staining | Grout lines first | Stone surface and joints |
| Slip risk | High on glossy tile when wet | High on mirror-polished stone |
| Best finish for wet areas | Clean plus anti-skid | Satin plus anti-skid |
In most homes both are present in the same flat, which is why we quote surface by surface instead of giving one blended rate.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Why clients book us
- 12 years of white marble work
- No acid on calcite stone at any stage
- Test patch shown before full commitment
- Whiteness and gloss compared before and after
Serving Sikkim and nearby areas
Sikkim jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Sikkim is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Granite Fitting Installation - common questions
Can yellow stains be removed?
Surface yellowing from polish residue or hard water lifts during polishing. Yellowing caused by water seepage from below, or inside a resin-filled slab, cannot be polished out, and we test a patch to show you which type you have.
Will polishing make it whiter than new?
No. It restores the stone to its clean colour by removing the dulled and stained top layer. We compare whiteness before and after so you can see the real change.
How do I keep it white afterwards?
Use only pH-neutral cleaner with clean water, never acid or bleach, and dry promptly. Sealing in entry areas helps stop grime soaking into the surface.
Why does white marble go grey?
Almost always residue and wear, not the stone itself. Soap film, mop haze and surface scratches scatter light, which reads as grey. Stripping and polishing restores the original tone.
Can tiles be polished like marble?
Tiles are refined and cleaned, not ground like stone. Polishing a vitrified tile past its factory finish wears the surface, so we clean and seal instead, or polish only where the tile type allows it.
Which is better for a bathroom floor?
Neither should be mirror-glossy when wet. Tile with anti-skid treatment, or honed stone with anti-skid, is the safer and more practical choice.
Do floors with both need separate visits?
No. One crew handles tiles, grout and stone in the same visit, which also avoids the joint line between two trades becoming anyone's excuse.