Tile and Granite Fitting in Delhi
Replacements and patch repairs go wrong when the new tile is laid at a different height to the old floor. We level the transition so the repair does not become a permanent eye-catcher. Delhi floors take a beating from dust, metro-era construction grit and hard water. Makrana, Katni and Kota dominate older colonies, while newer builder floors use imported marble.
- Measurement and layout planning
- Removal of old tile, mortar and adhesive
- Levelling of the base
- Fitting with consistent joint width
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in granite fitting installation
- Measurement and layout planning
- Removal of old tile, mortar and adhesive
- Levelling of the base
- Fitting with consistent joint width
- Cutting around fittings, columns and drains
- Grouting and joint finishing
- Transition levelling at doorways
- Clean-up and handover
What each surface needs
| Task | What we check | Result |
|---|---|---|
| Base preparation | Level and free of loose mortar | No hollow tiles |
| Joint width | Consistent across the room | Even grout lines |
| Transitions | Height matches old floor | No step at the door |
| Cut edges | Clean at fittings and corners | Neat finish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Site measurement and layout approval
- Removal of old surface and mortar
- Base levelling and dry laying
- Fitting with spacers and grouting
- Clean-up and handover
Granite Fitting Installation rates in Delhi
| Work | Pricing | Notes |
|---|---|---|
| Tile fitting | Per sq ft | Vitrified, ceramic, porcelain |
| Granite fitting | Per sq ft | Floor and stairs |
| Old tile and mortar removal | Per sq ft | Dust controlled |
| Cutting and edge work | Per running ft | Fittings and thresholds |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Why clients book us
- 12 years of tile and stone fitting in Delhi NCR
- Spacers used so joints stay even
- Old mortar fully removed, not built over
- Transitions levelled to the existing floor
- One team for fitting, grouting and cleaning
Serving Delhi and nearby areas
The Delhi team operates out of Badarpur, close to the Mathura Road corridor and South Delhi. Delhi floors take a beating from dust, metro-era construction grit and hard water. Makrana, Katni and Kota dominate older colonies, while newer builder floors use imported marble. Inspections are booked within 24-48 hours and most flats are finished the same day. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Granite Fitting Installation - common questions
Can you match tiles that are out of production?
Sometimes. Send a photo and tile size, and we will check what is available locally. If no match exists, the honest option is a deliberate contrast line rather than a bad match.
How soon can new tiles be walked on?
Light foot traffic after grouting sets, typically the next day. Full use depends on the adhesive and grout used, which we confirm at handover.
Do you remove the old flooring?
Yes. Old tile, mortar and adhesive are removed and cleared, and we tell you before starting if the base needs repair.
Can fitting be done in one room while we live at home?
Yes. We work room by room, mask the rest of the house and keep a walking route clear.