Diamond Marble Polishing in Shalimar Bagh
Cream polish and wax hide dullness for a few weeks. Diamond polishing removes the dull layer itself, working from coarse grit to a mirror pass, so the finish survives normal mopping and footfall. Work in Shalimar Bagh is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Gloss reading and scratch inspection
- Correcting damage before the final passes
- Progressive polishing to the finest grit
- Wet working to control heat and dust
At a glance
- 60-3000 grit
- No wax finish
- Klindex machines
A real before and after photo is added here for the strongest result.
What is included in diamond marble polishing
- Gloss reading and scratch inspection
- Correcting damage before the final passes
- Progressive polishing to the finest grit
- Wet working to control heat and dust
- Even pressure across lanes and corners
- Optional crystallisation or nano top coat
- Reflection check with you at handover
- Cleaning advice to protect the gloss
What each surface needs
| Target finish | Grit reached | Best for |
|---|---|---|
| Satin | 800-1500 | Homes, bedrooms |
| High gloss | 1500 | Living rooms, offices |
| Mirror | 3000 | Lobbies, showrooms |
| Mirror plus crystallisation | 3000 plus treatment | Hotels, high traffic |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss target agreed (free)
- Damage correction by grinding or coarse pads
- Progressive polishing to the agreed grit
- Mirror pass, then optional coating
- Reflection check and handover
Diamond Marble Polishing rates in Shalimar Bagh
| Work | Guide band | Typical case |
|---|---|---|
| Polish to high gloss | Rs 15-25 per sq ft | Sound floors |
| Mirror finish with correction | Rs 25-35 per sq ft | Scratched or patchy floors |
| Mirror with crystallisation | Quoted after inspection | Lobbies, hotels |
| Top-up coating | Quoted after inspection | Longer gloss life |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
The process, step by step
- Site inspection, gloss reading and hidden test patch
- Masking of skirting, fittings, doors and furniture edges
- Residue and old polish stripping where present
- Grinding if lippage or deep damage is found
- Progressive polishing through the grit sequence
- Optional silicate, crystallisation, epoxy or nano finish
- Edge and corner hand work
- Wash-down, walkthrough and care guidance
Each stage is completed on the whole area before the next one starts, so the floor never ends up with a bright patch next to an unfinished section.
Quotes are itemised per surface rather than as one lump sum, so a mixed floor of marble, tile and stone is priced line by line and you can approve, defer or drop any line.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Machines are matched to the job. A 400 mm single-disc machine for open floors, edge machines for skirtings and staircases, and hand blocks for corners and thresholds where a machine cannot safely reach.
Why clients book us
- Honest about whether your floor can reach mirror gloss
- Damage corrected first, reflections chased second
- Even finish verified with you before handover
- Silicate, crystallisation and nano options
Serving Shalimar Bagh and nearby areas
Shalimar Bagh jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Shalimar Bagh is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Diamond Marble Polishing - common questions
Can every marble floor reach mirror gloss?
Not every one. Hard, dense marbles like Statuario and Makrana take a very high gloss. Softer or heavily damaged stone may top out at a satin finish, and we tell you that before you pay for a mirror attempt.
Does a mirror finish show scratches more?
Yes, gloss reveals rather than hides surface damage. That is why correction comes before the final passes.
How long does mirror gloss last?
Eighteen to twenty-four months in homes and eight to twelve months in lobbies, longer with a silicate or nano coating.
Is a mirror finish slippery?
A mirror surface is smooth when wet. For bathrooms, kitchens and staircases we recommend a satin finish with anti-skid treatment instead.
How long does each step take?
As a guide, preparation is under an hour, grinding runs 25-40 minutes per 100 sq ft, polishing 15-25 minutes, and finishing plus clean-up about an hour. Bigger areas are scheduled over more days.
Can steps be skipped to save money?
Not safely. Skipping grit stages is the most common shortcut and shows up as scratch haze within weeks. If you want to reduce cost, reduce the area covered this cycle, not the process.
Do you work in one room or the whole floor at a time?
Room by room if you are living in, whole floor if the house is empty, which produces a more even finish because lighting and drying are consistent.