Residential Diamond Marble Polishing in Mehrauli Village
Cream polish and wax hide dullness for a few weeks. Diamond polishing removes the dull layer itself, working from coarse grit to a mirror pass, so the finish survives normal mopping and footfall. Work in Mehrauli Village is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Gloss reading and damage mapping before we quote
- Masking of walls, skirting and furniture edges
- Coarse diamond passes for scratches and lippage
- Progressive grits to remove every previous scratch pattern
At a glance
- 60-3000 grit
- No wax finish
- Klindex machines
A real before and after photo is added here for the strongest result.
What is included in diamond marble polishing
- Coarse diamond passes for scratches and lippage
- Progressive grits to remove every previous scratch pattern
- Fine polishing to bring up the working gloss
- Edge and corner work by hand machine
- Optional crystallisation or nano finish
- Floor washed and handed over with a gloss check
- Gloss reading and damage mapping before we quote
- Masking of walls, skirting and furniture edges
What each surface needs
| Grit | What it does | When it is needed |
|---|---|---|
| 60 and 100 | Cuts back lippage, deep scratches and rough patches | Uneven joints, heavy damage |
| 200 and 400 | Removes grinding marks, levels the surface | After any coarse stage |
| 800 | Closes the pores and prepares the stone | Almost every job |
| 1500 and 3000 | Working gloss and final mirror pass | Homes, lobbies, showrooms |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free, 20 minutes)
- Masking of all surfaces that should not get slurry
- Sequential diamond passes, 30-45 minutes per 100 sq ft
- Finishing pass at 1500 or 3000 grit, coating if you approve
- Handover with before and after gloss comparison
Diamond Marble Polishing rates in Mehrauli Village
| Work | Guide band | Where it applies |
|---|---|---|
| Light diamond pass | Rs 5-15 per sq ft | Sound floors, mild dulling |
| Standard diamond polishing | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep diamond plus crystallisation | Rs 25-35 per sq ft | Lippage, stains, heavy wear |
| Coating after polishing | Quoted after inspection | Silicate, epoxy or nano |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Working in an occupied home
- Room-by-room work so you keep living space throughout
- Furniture shifted, edges masked, dry walking paths left overnight
- Low-dust wet process, safe for children and pets after drying
- Society gate, lift and timing rules handled with your security desk
- Everyday advice at handover for mopping and monsoon care
Work planned around pets and children
- pH-neutral, low-odour products used as standard on occupied floors
- Paws and paws-on-floor: worked areas kept off-limits until dry, with dry routes planned
- Claw-mark lanes and pet accident stains treated as a separate item, not hidden under a polish
- Water bowls and feeding stations moved clear before work starts
- Nothing left on site that a pet can lick or chew, and waste is removed the same day
Tell us at booking if there are pets, and we will sequence the rooms so they always have access to one dry area.
Timing is agreed before the crew arrives: arrival window, the room sequence and the handover time are confirmed in writing, so nobody is waiting around or guessing when the floor will be free.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
Why clients book us
- 12 years, 600+ floor projects a year
- Fresh diamond segments, because worn pads leave swirl marks
- Correct pad set per stone: marble, granite, Kota, terrazzo
- One contractor for grinding, polishing and coatings
Serving Mehrauli Village and nearby areas
Mehrauli Village jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Mehrauli Village is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Diamond Marble Polishing - common questions
How much marble does it remove?
Microns, not visible layers. Even a full sequence on a damaged floor only corrects the worn top surface; coarse grinding is the stage that removes more and we only use it when needed.
How glossy will the floor look?
Most marble reaches a near-mirror gloss. Statuario and Makrana take a very high gloss, while honed travertine and some Kota floors look better satin. We agree the target before starting.
How long does the finish last?
Two to three years in homes before a light maintenance pass; eight to twelve months in offices and hotels, longer with a silicate or nano coating.
Can it be done in an occupied home?
Yes. The process is wet, so dust stays low. We work room by room and leave dry paths so you can stay in the house.
How is diamond polishing different from the polish my housekeeping does?
Housekeeping applies cream or wax that sits on the surface and wears off in walking lanes within weeks. Diamond polishing refines the stone itself, so the finish is part of the floor.
Can we stay at home during the work?
Yes. We work one or two rooms at a time, mask furniture edges and leave dry walking paths. Children and pets should stay off the worked area until it dries.
Do you handle society permissions?
We coordinate timing and lift use with your security desk. Society approval, where required, is arranged before the crew arrives.
Are the products safe for pets?
The products we use on occupied floors are pH-neutral and low-odour, and are safe once dry. That is the key point: dry, not just applied. We tell you the exact wait time at handover.
Can pet urine damage be fixed?
Surface staining and odour usually lift with poultice treatment and polishing. Urine that has soaked into the slab or a joint may leave a faint shadow, and we test a patch first to show you which one you have.
Do claw marks come out?
Light claw scuffing polishes out. Repeated deep marks in the same walking lane may need grinding, which we quote separately after looking at the floor.