Diamond Marble Polishing in Manipur
Cream polish and wax hide dullness for a few weeks. Diamond polishing removes the dull layer itself, working from coarse grit to a mirror pass, so the finish survives normal mopping and footfall. Work in Manipur is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Free inspection with a residue test
- Masking of skirting and furniture edges
- pH-neutral deep cleaning, no acid
- Residue and soap film stripping
At a glance
- 60-3000 grit
- No wax finish
- Klindex machines
A real before and after photo is added here for the strongest result.
What is included in diamond marble polishing
- Masking of skirting and furniture edges
- pH-neutral deep cleaning, no acid
- Residue and soap film stripping
- Grout-line and edge cleaning
- Stain treatment where present
- Optional polishing if the surface needs it
- Drying and care guidance
- Free inspection with a residue test
What each surface needs
| Test | What it means | Correct job |
|---|---|---|
| Wipes clean, still grey | Surface is worn | Polishing needed |
| Feels tacky or streaky | Residue build-up | Deep cleaning only |
| Local dark patches | Stains | Stain treatment |
| White marks near taps | Hard water scale | De-scale and neutral clean |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and residue test (free)
- Masking and preparation
- pH-neutral deep clean and stripping
- Joint and edge cleaning
- Handover with a cleaning routine for daily care
Diamond Marble Polishing rates in Manipur
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning | Rs 5-15 per sq ft | Residue and soil |
| Deep clean with stain treatment | Rs 15-25 per sq ft | Oil, rust, scale |
| Cleaning plus polishing | Rs 25-35 per sq ft | Worn surface |
| Sealing after cleaning | Quoted after inspection | Optional |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
What a proper job must include
| Stage | Non-negotiable |
|---|---|
| Before starting | Gloss reading, damage map, hidden test patch, written rate |
| Preparation | Skirting, fittings and furniture edges masked |
| During | Correct pad sequence for the stone, no skipped grits |
| Finishing | Edges and corners hand-done, not left dull |
| Handover | Walkthrough with you, after-care note, waste removed |
Use this list to compare any quote you receive, ours included. If a contractor skips the test patch or the handover walkthrough, the finish will show it within weeks.
Quotes are itemised per surface rather than as one lump sum, so a mixed floor of marble, tile and stone is priced line by line and you can approve, defer or drop any line.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Machines are matched to the job. A 400 mm single-disc machine for open floors, edge machines for skirtings and staircases, and hand blocks for corners and thresholds where a machine cannot safely reach.
Why clients book us
- pH-neutral products on all calcite stone
- Honest advice when cleaning alone is not enough
- Daily-care routine explained at handover
- 12 years of stone cleaning
Serving Manipur and nearby areas
Manipur jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Manipur is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Diamond Marble Polishing - common questions
How often should marble be deep cleaned?
Every six to twelve months in homes, and every three to six months in commercial spaces. Daily mopping with the wrong product makes build-up worse, not better.
Which cleaner should we use daily?
A pH-neutral stone cleaner with clean water, and dry the surface afterwards. Acid and abrasive cleaners damage polished marble within a few uses.
Can cleaning remove white patches near taps?
Hard-water scale yes, with a descaling clean. Etch marks caused by acid need light grinding and polishing, which is a different job.
Do I need cleaning or polishing?
Test one patch with a clean damp cloth. If it wipes clean but still looks grey, the surface is worn and needs polishing. If the cloth comes away dirty or the floor is streaky, it needs deep cleaning.
What should I check before paying?
That every surface you were quoted for has been finished, that edges and corners are not dull, that joints are clean and that the waste has been removed. Walk the floor with the crew still present, not after they leave.
Do you provide a written scope?
Yes. Surface by surface, with rate and scope, plus any optional items listed separately. Nothing is added after the work starts unless you approve a change.
Is a test patch really necessary?
It is the cheapest insurance on the job. One tile or a corner shows you the real result before you commit the whole floor.