Diamond Marble Polishing in Burari
Cream polish and wax hide dullness for a few weeks. Diamond polishing removes the dull layer itself, working from coarse grit to a mirror pass, so the finish survives normal mopping and footfall. Work in Burari is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Polish condition check before coating
- Diamond polishing first, because coating cannot hide scratches
- Surface cleaned of residue and moisture
- Nano coating applied evenly in sections
At a glance
- 60-3000 grit
- No wax finish
- Klindex machines
A real before and after photo is added here for the strongest result.
What is included in diamond marble polishing
- Polish condition check before coating
- Diamond polishing first, because coating cannot hide scratches
- Surface cleaned of residue and moisture
- Nano coating applied evenly in sections
- Curing time allowed before use
- Edge and joint treatment by hand
- Care instructions for cleaning without stripping the coat
- Re-application schedule explained
What each surface needs
| Area | Why coat it | Expected life |
|---|---|---|
| Kitchens and dining | Oil, turmeric, tea and wine spills | 12-24 months |
| Washbasins and wet areas | Hard water film and watermark rings | 12-18 months |
| Entry and lobby | Dust, grit and shoe marks | 12-24 months |
| Office and retail floors | Cleaning chemicals and trolley traffic | 12-18 months |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection to confirm the floor is polish-ready (free)
- Diamond polishing to remove scratches and dullness
- Surface cleaned and dried completely
- Nano coating applied and buffed evenly
- Curing and handover with cleaning guidance
Diamond Marble Polishing rates in Burari
| Work | Guide band | Notes |
|---|---|---|
| Polish plus nano coating | Rs 15-25 per sq ft | Standard homes |
| Polish plus coating on heavy wear | Rs 25-35 per sq ft | Lippage, stains, patchiness |
| Nano coating only | Quoted after inspection | Floor must already be polished and sound |
| Re-application | Quoted after inspection | Every 12-24 months |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
The process, step by step
- Site inspection, gloss reading and hidden test patch
- Masking of skirting, fittings, doors and furniture edges
- Residue and old polish stripping where present
- Grinding if lippage or deep damage is found
- Progressive polishing through the grit sequence
- Optional silicate, crystallisation, epoxy or nano finish
- Edge and corner hand work
- Wash-down, walkthrough and care guidance
Each stage is completed on the whole area before the next one starts, so the floor never ends up with a bright patch next to an unfinished section.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Timing is agreed before the crew arrives: arrival window, the room sequence and the handover time are confirmed in writing, so nobody is waiting around or guessing when the floor will be free.
Waste is removed the same day. Slurry, stripped residue, used pads and packaging leave with the crew instead of going into society bins or being left for you to dispose of.
Why clients book us
- Visible result checked with you before handover
- Clear re-application schedule instead of vague promises
- 12 years of stone finishing with Akemi nano products
- Coating applied only after polishing, never as a shortcut
Serving Burari and nearby areas
Burari jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Burari is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Diamond Marble Polishing - common questions
Does it change the appearance?
No. It is transparent and leaves the original colour and veining untouched, unlike a lacquer or film coating.
Can it be applied without polishing first?
It can, but it is a waste of money. Coating over scratches and dull patches locks them in, so we polish first or decline the job.
How long does it last?
Typically 12-24 months depending on traffic and cleaning products. Two applications a year in commercial spaces is normal.
Does it stop the floor from being slippery?
It does not increase slip resistance. For bathrooms and staircases we recommend an anti-skid treatment alongside or instead.
Will nano coating make my marble stain-proof?
No, and nobody should promise that. It slows absorption so you have time to wipe a spill. Leaving lemon juice or oil on the surface for hours can still mark the stone.
How long does each step take?
As a guide, preparation is under an hour, grinding runs 25-40 minutes per 100 sq ft, polishing 15-25 minutes, and finishing plus clean-up about an hour. Bigger areas are scheduled over more days.
Can steps be skipped to save money?
Not safely. Skipping grit stages is the most common shortcut and shows up as scratch haze within weeks. If you want to reduce cost, reduce the area covered this cycle, not the process.
Do you work in one room or the whole floor at a time?
Room by room if you are living in, whole floor if the house is empty, which produces a more even finish because lighting and drying are consistent.