Wood Look Tile Polishing Wood Look Tile Polishing in Delhi NCR
If your wood-look tiles have gone grey with residue, the fix is deep cleaning and a matte-matched finish, not gloss polishing. We match the original sheen instead of chasing shine. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Inspection of tile texture and finish
- Residue and soap film removal
- Machine scrubbing of plank lines
- Matte finish refinishing where needed
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in wood look tile polishing
- Matte finish refinishing where needed
- Grout or joint cleaning
- Sealer option for the texture
- Care advice to protect the matte look
- Wash-down and handover
- Inspection of tile texture and finish
- Residue and soap film removal
- Machine scrubbing of plank lines
What each surface needs
| Problem | Cause | Fix |
|---|---|---|
| Grey haze | Cleaning residue | Strip and matte-refinish |
| Slip marks | Rubber and grit | Scrub and de-scale |
| Dull sheen | Worn surface layer | Matte refinish |
| Dark plank lines | Grout soil | Deep clean and seal |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and sheen test (free)
- Masking and preparation
- Residue stripping and scrubbing
- Matte refinishing
- Handover with care guidance
Wood Look Tile Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning | Rs 5-15 per sq ft | Residue and film |
| Cleaning and matte refinish | Rs 15-25 per sq ft | Grey or worn tile |
| Deep restoration | Rs 25-35 per sq ft | Heavy wear |
| Sealing | Quoted after inspection | Texture protection |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
What improves, and what cannot be fixed
| Condition | Realistic outcome |
|---|---|
| Dull, even wear | Full gloss returns, looks new |
| Scratch lanes in walkways | Removed, surface level again |
| Light etching and hard water | Removed with polishing |
| Deep etching or acid burns | Faint mark may remain |
| Cracked or hollow slabs | Needs replacement, not polishing |
| Stains soaked through the slab | Lightened, not erased |
We show you this on a test patch before quoting the full job, so the result you see at handover is the result you were promised.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.
Why clients book us
- Matte finish respected, not polished into gloss
- Residue stripped before any refinishing
- Anti-skid tiles never polished
- Test patch shown before the full job
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Wood Look Tile Polishing - common questions
Can the grain texture be damaged?
Aggressive abrasive polishing flattens the texture. We use fine pads and control pressure, and we test a single tile first.
Is sealing needed?
In kitchens and high-traffic areas, yes. Sealing slows absorption into the texture, which is where cleaning residue builds up.
How often does it need cleaning?
Every six to twelve months for homes, and more often in commercial spaces with heavy foot traffic.
Will polishing make wood-look tiles shiny?
Only if the wrong process is used. We match the original matte sheen, which is what keeps the floor looking like wood rather than glossy ceramic.
Can the floor look exactly new again?
On sound stone with surface wear, yes. Where damage has gone deeper, such as acid burns or stains soaked through the slab, the result is a major improvement rather than perfection, and we tell you which one to expect before starting.
Why do some floors come back brighter than others?
Stone type and previous care. White and hard marbles take a higher gloss; softer or previously acid-washed floors top out lower. Consistent cleaning products are what keep the difference from widening.
Do you guarantee the same result on every surface?
No, and no honest contractor should. A mixed floor gets one uniform gloss level chosen after testing each surface, which sometimes means a satin finish rather than mirror.