Marble & floor polishing - Delhi NCR WhatsApp Request inspection +91 86070 01043 Email

Tiles Floor Polishing After Hours in Delhi NCR

Most tile floors in Delhi NCR look dull because the protective factory sheen has worn through in walking routes. We clean the surface properly, then refine it so the tile reads evenly again. Delhi NCR mixes very old housing stock with new high-rise towers, ???

  • Free inspection of tile type and surface condition
  • Masking of skirting, doors and fittings
  • Machine scrubbing to remove residue and grout haze
  • Surface refining with matched pads
Tiles Floor Polishing After Hours in Delhi NCR
Professional equipment Klindex, Taski, diamond pads 60–3000
Diamond technology Graded steps matched to stone
Transparent quotation Written quote after inspection
Comprehensive services Marble, granite, tile & wood
Floor before polishing
Before
Floor after polishing
After

The results speak for themselves

See the difference professional polishing makes

Diamond-grade pads and staged honing restore clarity and slip-safe gloss — without replacing good stone. Every job starts with a test patch so you approve the finish before full-area work.

Our polishing process

1

Inspection

Site visit, moisture and scratch check

2

Grinding

Level uneven areas when required

3

Joint filling

Fill pits and open joints if needed

4

Honing & polishing

Diamond grit sequence to target gloss

5

Final finishing

Silicate, epoxy or nano if quoted

6

Handover

Walk-through and care advice

Related services

Suitable for

ApartmentsVillasOfficesHotelsShowroomsHospitals

Marble polishing services across Delhi NCR

Full service information

Tile Polishing · Delhi NCR

Tiles Floor Polishing Tile Polishing in Delhi NCR

Most tile floors in Delhi NCR look dull because the protective factory sheen has worn through in walking routes. We clean the surface properly, then refine it so the tile reads evenly again. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.

  • Free inspection of tile type and surface condition
  • Masking of skirting, doors and fittings
  • Machine scrubbing to remove residue and grout haze
  • Surface refining with matched pads

Get a written quote today

At a glance

  • Vitrified & ceramic
  • Grout cleaned too
  • Anti-skid safe

A real before and after photo is added here for the strongest result.

What is included in tiles floor polishing price

  • Masking of skirting, doors and fittings
  • Machine scrubbing to remove residue and grout haze
  • Surface refining with matched pads
  • Grout-line cleaning as part of the same visit
  • Optional gloss top-up or sealer
  • Wash-down and walkthrough
  • Care advice so the finish is not stripped
  • Free inspection of tile type and surface condition

What each surface needs

TileWhat we doResult
Vitrified and porcelainScrub, de-scale, refine surfaceEven satin to gloss
CeramicDeep clean and gloss top-upClean, lightly glossy
Anti-skid and textured tileClean only, no polishingSafe surface preserved
Wood-look tileClean and matte finish matchedUniform matte look

Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.

How the job runs

  1. Inspection and tile test (free)
  2. Masking and preparation
  3. Machine scrubbing and residue removal
  4. Surface refining and optional sealing
  5. Handover with gloss check

Tiles Floor Polishing Price rates in Delhi NCR

WorkGuide bandNotes
Tile deep cleaningRs 5-15 per sq ftHaze, residue, grout film
Tile polishingRs 15-25 per sq ftWorn sheen, scratch haze
Deep restorationRs 25-35 per sq ftHeavy wear and staining
Sealing or top-up coatQuoted after inspectionHigh-traffic floors

Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.

What changes the price for tiles floor polishing price in Delhi NCR

FactorEffect on rateWhat to expect
Total areaBigger areas cost less per sq ftSlab rates above 1,000 sq ft
Damage depthGrinding raises the rateDecided by the test patch
Stone typeImported and filled slabs take longerSee the surface table
AccessUpper floors and corners take longerConfirmed before booking

Ask for one written rate per surface. A single number for the whole house without an inspection always changes later.

Night, weekend and occupied-premises work

  • Evening, night and Sunday slots so trading hours and office shifts are untouched
  • Machine noise managed around residents, guests and neighbours, with work sequenced floor by floor
  • Zones handed back ready for use before the next shift or opening time
  • Lighting provided where a site has no working lights after hours
  • Supervisor present throughout, with one point of contact for the site manager

Working after hours costs a little more in crew arrangements, and we tell you that upfront rather than burying it in the rate.

The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.

Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.

Why clients book us

  • Anti-skid and textured tiles are cleaned, never polished
  • Residue stripped before any top-up, so nothing is sealed in
  • Test patch shown before you commit
  • One team for tile, grout, marble and granite

Serving Delhi NCR and nearby areas

Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.

Get a written quote today

Tiles Floor Polishing Price - common questions

Can vitrified tiles really be polished?

Yes. The surface haze is usually residue and micro-scratches, which lift with the right pads. Tiles that have lost their pattern through deep abrasion cannot be restored, and we say so after testing.

Will polishing make my tiles slippery?

A gloss finish is smoother when wet. For bathrooms and balconies we clean and seal instead of polishing, or add an anti-skid treatment.

Do you clean grout at the same time?

Yes. Grout lines are cleaned in the same visit, because a polished floor with black grout looks unfinished.

How long does it take?

Bathrooms and kitchens finish the same day; a full apartment usually takes one working day.

Is the price negotiable?

The rate per sq ft is not inflated to leave room for haggling. We scope honestly: if the floor needs only a buff, we quote a buff instead of a full diamond job, and tell you when the cheaper option will hold.

Do you take advance payment?

The package is confirmed in writing first. Advance for material is normal on large jobs; the balance is settled after the walkthrough.

Is there a premium for night work?

Sometimes, and we say so before booking. It covers crew scheduling and transport at unsociable hours, not the work itself.

Can you work while our premises stay open?

Yes. Work is phased section by section, with dry paths and signage so customers and staff are never crossing a wet or machine-worked area.

Will the machines disturb neighbours?

Machine noise is unavoidable for short periods. We sequence the noisiest work earlier, and for residential buildings we stay within the society's permitted hours.

Frequently asked questions

Call or WhatsApp for quick answers about scope, timing and guide rates for this service.

Let's restore your floors

Free inspection · written quote · Delhi NCR