Marble & floor polishing - Delhi NCR WhatsApp Request inspection +91 86070 01043 Email

Tile Professional Cleaning for Marble and Granite in Delhi NCR

Vitrified, ceramic and porcelain tiles do not fade, but the surface does. Fine scratches and cleaning residue build up into a grey haze that no amount of mopping removes, and that is what tile polishing corrects. Delhi NCR mixes very old housing stock with ???

  • Free inspection of porosity and stain history
  • Deep cleaning before sealing (sealer over dirt seals dirt)
  • Drying time allowed, no sealing on damp stone
  • Impregnating sealer applied evenly
Tile Professional Cleaning for Marble and Granite in Delhi NCR
Professional equipment Klindex, Taski, diamond pads 60–3000
Diamond technology Graded steps matched to stone
Transparent quotation Written quote after inspection
Comprehensive services Marble, granite, tile & wood
Floor before polishing
Before
Floor after polishing
After

The results speak for themselves

See the difference professional polishing makes

Diamond-grade pads and staged honing restore clarity and slip-safe gloss — without replacing good stone. Every job starts with a test patch so you approve the finish before full-area work.

Our polishing process

1

Inspection

Site visit, moisture and scratch check

2

Grinding

Level uneven areas when required

3

Joint filling

Fill pits and open joints if needed

4

Honing & polishing

Diamond grit sequence to target gloss

5

Final finishing

Silicate, epoxy or nano if quoted

6

Handover

Walk-through and care advice

Related services

Suitable for

ApartmentsVillasOfficesHotelsShowroomsHospitals

Marble polishing services across Delhi NCR

Full service information

Tile Polishing · Delhi NCR

Tile Professional Cleaning in Delhi NCR

Vitrified, ceramic and porcelain tiles do not fade, but the surface does. Fine scratches and cleaning residue build up into a grey haze that no amount of mopping removes, and that is what tile polishing corrects. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.

  • Free inspection of porosity and stain history
  • Deep cleaning before sealing (sealer over dirt seals dirt)
  • Drying time allowed, no sealing on damp stone
  • Impregnating sealer applied evenly

Book your free inspection

At a glance

  • Vitrified & ceramic
  • Grout cleaned too
  • Anti-skid safe

A real before and after photo is added here for the strongest result.

What is included in tile professional cleaning

  • Deep cleaning before sealing (sealer over dirt seals dirt)
  • Drying time allowed, no sealing on damp stone
  • Impregnating sealer applied evenly
  • Second coat on high-absorption stone
  • Buffer and residue removal
  • Wet-area and kitchen priority treatment
  • Maintenance and re-seal schedule explained
  • Free inspection of porosity and stain history

What each surface needs

StoneAbsorptionSeal priority
MarbleMedium, acid and oil sensitiveKitchens, entries, washbasins
LimestoneHighAll wet areas
GraniteLowKitchen platforms, stairs
TravertineHigh, pittedBathrooms, outdoors

Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.

How the job runs

  1. Inspection and porosity test (free)
  2. Deep cleaning and residue removal
  3. Full drying of the stone surface
  4. Sealer applied in even coats
  5. Buffing, handover and re-seal schedule

Tile Professional Cleaning rates in Delhi NCR

WorkGuide bandNotes
Clean and sealRs 5-15 per sq ftDry floors and walls
Strip, clean and sealRs 15-25 per sq ftOld coating present
High-absorption stone, two coatsQuoted after inspectionLimestone and travertine
Re-seal cyclePer sq ftEvery 12-24 months

Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.

Marble and granite need different treatment

MarbleGranite
HardnessSofter, scratches more visiblyHarder, resists scratches
AcidEtches immediately, never useDulls the surface, avoid
FinishingDiamond pads up to 3000 gritIts own pad set and compounds
Typical aftercareSealer every 12-24 monthsSealer on kitchen and stairs
Gloss achievableVery high on hard whitesDeep lustre, not mirror

We keep separate pad sets and compounds for each, because using marble products on granite (or the reverse) is the fastest way to end up with a hazy surface.

Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.

Machines are matched to the job. A 400 mm single-disc machine for open floors, edge machines for skirtings and staircases, and hand blocks for corners and thresholds where a machine cannot safely reach.

Team composition is consistent: a supervisor plus two machine operators on standard jobs, with additional hands for staircases, multiple floors or tight access. The same supervisor stays with the job start to finish.

Why clients book us

  • Sealer applied only on clean, dry stone
  • Impregnating sealers used, not film coatings
  • Honest about what sealing does and does not do
  • Re-seal cycle scheduled so protection never lapses

Serving Delhi NCR and nearby areas

Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.

Book your free inspection

Tile Professional Cleaning - common questions

Will sealing make my marble stain-proof?

No, and any contractor saying that is overselling. Sealing buys you time to wipe a spill. Lemon juice or oil left overnight can still mark sealed stone.

How often should stone be re-sealed?

Every twelve to twenty-four months for working areas like kitchens, entries and washbasins. Dry bedroom floors and walls hold sealer much longer.

Can sealer be applied over an old polish?

No. It will not bond, and it traps the old residue underneath. Cleaning or stripping first is part of the job, not an optional extra.

Does sealing change the colour?

Impregnating sealers are colourless. If a sealer darkens the stone, it is a film-forming product rather than an impregnator, which is a different finish choice.

Can you polish a floor that mixes marble and granite?

Yes, and it is common in lobbies and staircases. Each surface is polished to a matching level of sheen rather than the same pad sequence, so the two read as one floor.

Is granite easier to maintain than marble?

It is less acid-sensitive and harder, so it stains and scratches less. It still dulls from repeated wrong cleaning, and it still needs sealing in wet or greasy areas.

Why does marble etch while granite does not?

Marble is calcium-based, so acid dissolves the surface and leaves a white mark. Granite is silicate-based and resists acid better, though strong acid still dulls its polish.

Frequently asked questions

Call or WhatsApp for quick answers about scope, timing and guide rates for this service.

Let's restore your floors

Free inspection · written quote · Delhi NCR