Tile Fitting Installation in Sikkim
Tile and granite fitting is judged by three things: flatness, joint width and how the edges meet at thresholds and columns. Get those wrong and no amount of cleaning will fix how the floor reads. Work in Sikkim is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Gloss reading and patchiness mapping
- Diamond polishing to prepare the surface
- Crystallisation applied in sections with a steel-wool pad under machine
- Even working to avoid swirl marks
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in tile fitting installation
- Even working to avoid swirl marks
- Second pass on high-traffic routes
- Residue buffed off and floor washed
- Walkway protection until dry
- Gloss check with you
- Gloss reading and patchiness mapping
- Diamond polishing to prepare the surface
- Crystallisation applied in sections with a steel-wool pad under machine
What each surface needs
| Area | Why crystallise | Expected life |
|---|---|---|
| Lobby and reception | Constant footfall and trolley traffic | 12-24 months |
| Showroom and retail | Scuffing and display lighting | 12-18 months |
| Staircases | Edge wear and heel marks | 12-18 months |
| Homes with pets | Claw marks and repeated mopping | 18-24 months |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss reading (free)
- Diamond polishing to level the surface
- Crystallisation worked in section by section
- Second pass on heavy-traffic lanes
- Residue removal, wash-down and handover
Tile Fitting Installation rates in Sikkim
| Work | Guide band | Notes |
|---|---|---|
| Polish plus light crystallisation | Rs 15-25 per sq ft | Homes, moderate traffic |
| Full crystallisation with deep polish | Rs 25-35 per sq ft | Lobbies, showrooms, heavy traffic |
| Crystallisation only | Quoted after inspection | Floor must already be sound |
| Repeat maintenance | Quoted after inspection | 12-24 months |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Marble and granite need different treatment
| Marble | Granite | |
|---|---|---|
| Hardness | Softer, scratches more visibly | Harder, resists scratches |
| Acid | Etches immediately, never use | Dulls the surface, avoid |
| Finishing | Diamond pads up to 3000 grit | Its own pad set and compounds |
| Typical aftercare | Sealer every 12-24 months | Sealer on kitchen and stairs |
| Gloss achievable | Very high on hard whites | Deep lustre, not mirror |
We keep separate pad sets and compounds for each, because using marble products on granite (or the reverse) is the fastest way to end up with a hazy surface.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Why clients book us
- Suitable for marble, terrazzo and most calcite stone
- Honest advice when a floor is too damaged for crystallisation alone
- 12 years of marble finishing
- Applied only after proper diamond polishing
Serving Sikkim and nearby areas
Sikkim jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Sikkim is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Tile Fitting Installation - common questions
Will it make the floor slippery?
A crystallised surface is smooth and reflective, so wet areas need care. In bathrooms and on stairs we recommend a satin finish with anti-skid treatment instead.
How long does it last?
Twelve to twenty-four months depending on traffic. Lobbies are usually re-treated annually, homes every two years.
Can it be done on a scratched floor?
It should not be. Crystallising a scratched surface sets the scratches in. We polish first, and if the damage is deep we recommend grinding.
What is the difference between crystallisation and silicate?
Crystallisation builds a harder, glassier surface layer and suits heavy footfall. Silicate gives a wetter, deeper gloss and is gentler on the stone. Many projects use silicate for homes and crystallisation for lobbies.
Can you polish a floor that mixes marble and granite?
Yes, and it is common in lobbies and staircases. Each surface is polished to a matching level of sheen rather than the same pad sequence, so the two read as one floor.
Is granite easier to maintain than marble?
It is less acid-sensitive and harder, so it stains and scratches less. It still dulls from repeated wrong cleaning, and it still needs sealing in wet or greasy areas.
Why does marble etch while granite does not?
Marble is calcium-based, so acid dissolves the surface and leaves a white mark. Granite is silicate-based and resists acid better, though strong acid still dulls its polish.