Tile Fitting Installation in Punjab
Replacements and patch repairs go wrong when the new tile is laid at a different height to the old floor. We level the transition so the repair does not become a permanent eye-catcher. Work in Punjab is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Gloss reading and scratch inspection
- Correcting damage before the final passes
- Progressive polishing to the finest grit
- Wet working to control heat and dust
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in tile fitting installation
- Correcting damage before the final passes
- Progressive polishing to the finest grit
- Wet working to control heat and dust
- Even pressure across lanes and corners
- Optional crystallisation or nano top coat
- Reflection check with you at handover
- Cleaning advice to protect the gloss
- Gloss reading and scratch inspection
What each surface needs
| Target finish | Grit reached | Best for |
|---|---|---|
| Satin | 800-1500 | Homes, bedrooms |
| High gloss | 1500 | Living rooms, offices |
| Mirror | 3000 | Lobbies, showrooms |
| Mirror plus crystallisation | 3000 plus treatment | Hotels, high traffic |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss target agreed (free)
- Damage correction by grinding or coarse pads
- Progressive polishing to the agreed grit
- Mirror pass, then optional coating
- Reflection check and handover
Tile Fitting Installation rates in Punjab
| Work | Guide band | Typical case |
|---|---|---|
| Polish to high gloss | Rs 15-25 per sq ft | Sound floors |
| Mirror finish with correction | Rs 25-35 per sq ft | Scratched or patchy floors |
| Mirror with crystallisation | Quoted after inspection | Lobbies, hotels |
| Top-up coating | Quoted after inspection | Longer gloss life |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Marble and granite need different treatment
| Marble | Granite | |
|---|---|---|
| Hardness | Softer, scratches more visibly | Harder, resists scratches |
| Acid | Etches immediately, never use | Dulls the surface, avoid |
| Finishing | Diamond pads up to 3000 grit | Its own pad set and compounds |
| Typical aftercare | Sealer every 12-24 months | Sealer on kitchen and stairs |
| Gloss achievable | Very high on hard whites | Deep lustre, not mirror |
We keep separate pad sets and compounds for each, because using marble products on granite (or the reverse) is the fastest way to end up with a hazy surface.
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Protection is planned, not improvised. Furniture is moved to one side and covered, curtain hems are lifted, and a walking route is kept clear throughout so the household can still move around.
Why clients book us
- Even finish verified with you before handover
- Silicate, crystallisation and nano options
- 12 years of marble finishing
- Honest about whether your floor can reach mirror gloss
Serving Punjab and nearby areas
Punjab jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Punjab is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Tile Fitting Installation - common questions
Can every marble floor reach mirror gloss?
Not every one. Hard, dense marbles like Statuario and Makrana take a very high gloss. Softer or heavily damaged stone may top out at a satin finish, and we tell you that before you pay for a mirror attempt.
Does a mirror finish show scratches more?
Yes, gloss reveals rather than hides surface damage. That is why correction comes before the final passes.
How long does mirror gloss last?
Eighteen to twenty-four months in homes and eight to twelve months in lobbies, longer with a silicate or nano coating.
Is a mirror finish slippery?
A mirror surface is smooth when wet. For bathrooms, kitchens and staircases we recommend a satin finish with anti-skid treatment instead.
Can you polish a floor that mixes marble and granite?
Yes, and it is common in lobbies and staircases. Each surface is polished to a matching level of sheen rather than the same pad sequence, so the two read as one floor.
Is granite easier to maintain than marble?
It is less acid-sensitive and harder, so it stains and scratches less. It still dulls from repeated wrong cleaning, and it still needs sealing in wet or greasy areas.
Why does marble etch while granite does not?
Marble is calcium-based, so acid dissolves the surface and leaves a white mark. Granite is silicate-based and resists acid better, though strong acid still dulls its polish.