Tile Fitting Installation in Nagaland
Tile and granite fitting is judged by three things: flatness, joint width and how the edges meet at thresholds and columns. Get those wrong and no amount of cleaning will fix how the floor reads. Work in Nagaland is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Free on-site gloss and scratch check
- Masking of skirting, walls and furniture edges
- Diamond grinding where scratches or lippage need it
- Progressive honing and fine polishing passes
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in tile fitting installation
- Free on-site gloss and scratch check
- Masking of skirting, walls and furniture edges
- Diamond grinding where scratches or lippage need it
- Progressive honing and fine polishing passes
- Marble-safe stain and film removal (no acid)
- Edge, corner and staircase hand polishing
- Grout-line clean-up and hairline crack fill
- Optional silicate, crystallisation or nano finish
- Full wash-down and walkthrough with you
- After-care guidance for the first week
What each surface needs
| Stone | What we do | Finish you get |
|---|---|---|
| Italian marble (Statuario, Carrara) | Fine honing and polishing, acid-free | High mirror gloss |
| Makrana and Indian marble | Grinding, stain removal, silicate option | Deep satin to gloss |
| Kota and Katni stone | Level grinding, densifier, buff | Even matte to gloss |
| Terrazzo and mosaic | Ground back to aggregate, then polished | Medium to high gloss |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss reading (free, 20 minutes)
- Masking and furniture shifting (30 minutes)
- Grinding and honing, 25-40 minutes per 100 sq ft
- Polishing and optional sealing, 15-25 minutes per 100 sq ft
- Wash-down, gloss check with you and after-care note
Tile Fitting Installation rates in Nagaland
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance buff | Rs 5-15 per sq ft | Sound floor, light dulling |
| Diamond polishing | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep diamond plus crystallisation | Rs 25-35 per sq ft | Heavy wear, stains, lippage |
| Silicate or nano coating | Quoted after inspection | Wet areas, high traffic |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Marble and granite need different treatment
| Marble | Granite | |
|---|---|---|
| Hardness | Softer, scratches more visibly | Harder, resists scratches |
| Acid | Etches immediately, never use | Dulls the surface, avoid |
| Finishing | Diamond pads up to 3000 grit | Its own pad set and compounds |
| Typical aftercare | Sealer every 12-24 months | Sealer on kitchen and stairs |
| Gloss achievable | Very high on hard whites | Deep lustre, not mirror |
We keep separate pad sets and compounds for each, because using marble products on granite (or the reverse) is the fastest way to end up with a hazy surface.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Why clients book us
- 600+ floor projects completed every year
- Klindex and Taski machines with fresh diamond segments
- Quote fixed in writing before the first pad runs
- Silicate Sil200 and Sil800, Epoxy 1005 and Akemi nano in stock
Serving Nagaland and nearby areas
Nagaland jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Nagaland is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Tile Fitting Installation - common questions
How long does the job take?
A two-person crew finishes about 800-1,000 sq ft in a working day. Grinding plus polishing on the same area adds roughly half a day. The floor is walkable the same evening.
Will polishing thin my marble?
Polishing removes microns, not millimetres. We test a patch first and step through grits gradually, so only the worn surface layer is corrected and the slab keeps its thickness.
Do you use acid on marble?
Never. Marble is calcium-based, so acid etches it. We clean with pH-neutral products and treat oil, rust and paint stains with poultice instead.
Can we stay in the house during the work?
Yes. Polishing is done wet so dust stays low, furniture edges are masked and we leave dry walking paths overnight.
How often should marble be polished?
Homes usually every 18-24 months because of dust and monsoon film; offices and showrooms every 8-12 months.
Can you polish a floor that mixes marble and granite?
Yes, and it is common in lobbies and staircases. Each surface is polished to a matching level of sheen rather than the same pad sequence, so the two read as one floor.
Is granite easier to maintain than marble?
It is less acid-sensitive and harder, so it stains and scratches less. It still dulls from repeated wrong cleaning, and it still needs sealing in wet or greasy areas.
Why does marble etch while granite does not?
Marble is calcium-based, so acid dissolves the surface and leaves a white mark. Granite is silicate-based and resists acid better, though strong acid still dulls its polish.