Marble & floor polishing - Delhi NCR WhatsApp Request inspection +91 86070 01043 Email

Tile Cleaning Company Service in Delhi NCR

Most tile floors in Delhi NCR look dull because the protective factory sheen has worn through in walking routes. We clean the surface properly, then refine it so the tile reads evenly again. Delhi NCR mixes very old housing stock with new high-rise towers, ???

  • Damage mapped room by room and photographed
  • Poultice treatment for oil, rust and organic stains
  • Etch mark repair by fine grinding and re-polishing
  • Crack, chip and joint filling with colour matching
Tile Cleaning Company in Delhi NCR Service
Professional equipment Klindex, Taski, diamond pads 60–3000
Diamond technology Graded steps matched to stone
Transparent quotation Written quote after inspection
Comprehensive services Marble, granite, tile & wood
Floor before polishing
Before
Floor after polishing
After

The results speak for themselves

See the difference professional polishing makes

Diamond-grade pads and staged honing restore clarity and slip-safe gloss — without replacing good stone. Every job starts with a test patch so you approve the finish before full-area work.

Our polishing process

1

Inspection

Site visit, moisture and scratch check

2

Grinding

Level uneven areas when required

3

Joint filling

Fill pits and open joints if needed

4

Honing & polishing

Diamond grit sequence to target gloss

5

Final finishing

Silicate, epoxy or nano if quoted

6

Handover

Walk-through and care advice

Related services

Suitable for

ApartmentsVillasOfficesHotelsShowroomsHospitals

Marble polishing services across Delhi NCR

Full service information

Tile Polishing · Delhi NCR

Tile Cleaning in Delhi NCR

Most tile floors in Delhi NCR look dull because the protective factory sheen has worn through in walking routes. We clean the surface properly, then refine it so the tile reads evenly again. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.

  • Damage mapped room by room and photographed
  • Poultice treatment for oil, rust and organic stains
  • Etch mark repair by fine grinding and re-polishing
  • Crack, chip and joint filling with colour matching

Request a free site check

At a glance

  • Vitrified & ceramic
  • Grout cleaned too
  • Anti-skid safe

A real before and after photo is added here for the strongest result.

What is included in tile cleaning company

  • Crack, chip and joint filling with colour matching
  • Grinding to level slabs where needed
  • Full polishing to one uniform gloss
  • Sealer or coating over treated areas
  • Written verdict on what will repair and what needs replacing
  • Damage mapped room by room and photographed
  • Poultice treatment for oil, rust and organic stains
  • Etch mark repair by fine grinding and re-polishing

What each surface needs

DamageCauseHow we fix it
White etch marksLemon, vinegar, cola, toilet cleanerFine grinding then re-polish to match
Oil and ghee stainsKitchen spills, pooja areasPoultice drawing out, then polish
Rust ringsMetal legs, planters, wet iron chairsRust poultice, light grind, sealing
Hairline cracks and chipsExpansion, impact, weak jointsColour-matched epoxy fill, shaped and polished

Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.

How the job runs

  1. Damage mapping and photos (free)
  2. Poultice applied and left to draw stains out
  3. Crack, chip and joint repair, colour matched
  4. Grinding and polishing to one uniform gloss
  5. Protection applied and handover with before photos

Tile Cleaning Company rates in Delhi NCR

WorkGuide bandNotes
Etch and stain removal with polishRs 15-25 per sq ftSurface-level damage
Deep restoration with grindingRs 25-35 per sq ftHeavy wear, patchiness, lippage
Poultice stain treatmentQuoted per patchOil, rust, organic stains
Crack and joint repairPer running ftFilled and colour matched

Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.

Looking after the finish

TimeframeWhat to do
First 24 hoursStay off coated areas, keep furniture off the floor
First weekDry mop only, no wet mopping, no chemical cleaners
OngoingpH-neutral cleaner, damp mop, dry after
Every 12-18 monthsLight maintenance polish to hold the gloss
  • Never use acid, bleach, vinegar or abrasive powder on stone
  • Wipe spills promptly, particularly lemon, tea and oil
  • Use felt pads on furniture and mats at entry points
  • Keep planters and metal legs off wet floors to prevent rust rings

Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.

Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.

Water and power are the two site requirements. We need one working socket within reach of a lead and a water point; everything else, including masking material and waste bags, comes with the crew.

Why clients book us

  • Colour matching as standard so repairs do not show as grey lines
  • Honest verdicts when a slab must be replaced
  • One team for stain treatment, crack filling, grinding and polishing
  • Before and after photos kept for every restoration

Serving Delhi NCR and nearby areas

Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.

Request a free site check

Tile Cleaning Company - common questions

Can etched marble really be repaired?

Yes if the etching is on the surface. Etch marks are shallow chemical burns of the polished layer, so light grinding and a matched polish remove them. Deep etching may leave a faint mark, which we show you on a test patch first.

Will a repaired crack be invisible?

With a colour-matched fill and re-polishing it blends into the veining and is hard to find from standing height. Under close direct light a faint line can remain, which is normal and still far better than an open crack collecting dirt.

Do treated stains come back?

Only if the cause is still there. A rust ring returns if the same wet metal leg sits on the floor again, so we recommend fixing the cause and sealing the area.

How long does restoration take?

A typical 1,000 sq ft apartment takes one to two days including poultice time, and the floor behaves like a normally polished floor afterwards.

Is restoration cheaper than replacing the floor?

Almost always. It costs a fraction of removal and re-laying, avoids matching problems with imported stone, and keeps the house usable. Replacement only makes sense for hollow, cracked-through or fully stained slabs.

What should I avoid in the first week?

Wet mopping, chemical floor cleaners, dragging furniture and placing potted plants back on the floor. Dry mopping and clean water only until the finish settles.

Which cleaner do you recommend?

Any pH-neutral stone cleaner, used with clean water and followed by drying. That single habit prevents most of the dullness and staining we are called back to fix.

What voids the finish durability?

Acid and abrasive cleaning. A floor polished this month can look dull in eight weeks if it is mopped with an acidic general-purpose cleaner.

Frequently asked questions

Call or WhatsApp for quick answers about scope, timing and guide rates for this service.

Let's restore your floors

Free inspection · written quote · Delhi NCR