Marble & floor polishing - Delhi NCR WhatsApp Request inspection +91 86070 01043 Email

Terrazzo Tile Cleaning in Delhi NCR

Terrazzo and mosaic floors go dull in patches because the cement matrix wears faster than the chips. Grinding back to the aggregate and polishing it evenly is the only way to bring back the pattern and the shine together. Delhi NCR mixes very old housing st???

  • Free inspection of chip density and surface damage
  • Masking of skirting, walls and fittings
  • Grinding back to clean aggregate
  • Joint and crack filling
Terrazzo Tile Cleaning in Delhi NCR
Professional equipment Klindex, Taski, diamond pads 60–3000
Diamond technology Graded steps matched to stone
Transparent quotation Written quote after inspection
Comprehensive services Marble, granite, tile & wood
Floor before polishing
Before
Floor after polishing
After

The results speak for themselves

See the difference professional polishing makes

Diamond-grade pads and staged honing restore clarity and slip-safe gloss — without replacing good stone. Every job starts with a test patch so you approve the finish before full-area work.

Our polishing process

1

Inspection

Site visit, moisture and scratch check

2

Grinding

Level uneven areas when required

3

Joint filling

Fill pits and open joints if needed

4

Honing & polishing

Diamond grit sequence to target gloss

5

Final finishing

Silicate, epoxy or nano if quoted

6

Handover

Walk-through and care advice

Related services

Suitable for

ApartmentsVillasOfficesHotelsShowroomsHospitals

Marble polishing services across Delhi NCR

Full service information

Terrazzo Polishing · Delhi NCR

Terrazzo Tile Cleaning Terrazzo Floor Polishing in Delhi NCR

Terrazzo and mosaic floors go dull in patches because the cement matrix wears faster than the chips. Grinding back to the aggregate and polishing it evenly is the only way to bring back the pattern and the shine together. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.

  • Free inspection of chip density and surface damage
  • Masking of skirting, walls and fittings
  • Grinding back to clean aggregate
  • Joint and crack filling

Book your free inspection

At a glance

  • Grind to aggregate
  • Pattern restored
  • Densifier option

A real before and after photo is added here for the strongest result.

What is included in terrazzo tile cleaning

  • Free inspection of chip density and surface damage
  • Masking of skirting, walls and fittings
  • Grinding back to clean aggregate
  • Joint and crack filling
  • Progressive honing and polishing
  • Densifier treatment for a harder surface
  • Optional wax or sealer finish
  • Wash-down and handover

What each surface needs

ConditionProcessResult
Dull but soundLight grind and polishEven medium gloss
Patchy with wax build-upGrind to aggregate, then polishPattern restored
Cracked or chippedFill, level, then polishContinuous surface
Heavy traffic floorsGrind, polish, densifyHarder, longer-lasting finish

Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.

How the job runs

  1. Inspection and test patch (free)
  2. Masking and preparation
  3. Grinding to expose aggregate
  4. Honing and polishing to agreed gloss
  5. Densifier or sealer, then handover

Terrazzo Tile Cleaning rates in Delhi NCR

WorkGuide bandNotes
Terrazzo buffingRs 5-15 per sq ftSound floor, mild dulling
Grinding and polishingRs 15-25 per sq ftWax build-up, patchiness
Deep restorationRs 25-35 per sq ftCracks, chips, heavy wear
Densifier or sealerQuoted after inspectionHigh-traffic floors

Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.

What a proper job must include

StageNon-negotiable
Before startingGloss reading, damage map, hidden test patch, written rate
PreparationSkirting, fittings and furniture edges masked
DuringCorrect pad sequence for the stone, no skipped grits
FinishingEdges and corners hand-done, not left dull
HandoverWalkthrough with you, after-care note, waste removed

Use this list to compare any quote you receive, ours included. If a contractor skips the test patch or the handover walkthrough, the finish will show it within weeks.

Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.

Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.

Why clients book us

  • Grinding is quoted honestly, because polishing alone cannot fix a mottled floor
  • Cracks and chips filled before polishing
  • Densifier offered where traffic is heavy
  • Chip pattern checked on a test patch

Serving Delhi NCR and nearby areas

Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.

Book your free inspection

Terrazzo Tile Cleaning - common questions

Why does terrazzo look patchy after cleaning?

Because the cement matrix wears down faster than the chips, so light reflects differently across the floor. Grinding back to a level surface and polishing it evenly is the fix.

Can cracked terrazzo be repaired?

Yes. Cracks are filled with a matched cement or epoxy mix, levelled, then ground and polished so they stop showing as dark lines.

How often does terrazzo need grinding?

Usually every 5-10 years for homes. Lighter polishing passes every 18-24 months keep it looking sharp in between.

Is terrazzo more expensive to polish than marble?

It is comparable, but it usually needs grinding on the first visit, which marble floors sometimes do not.

What should I check before paying?

That every surface you were quoted for has been finished, that edges and corners are not dull, that joints are clean and that the waste has been removed. Walk the floor with the crew still present, not after they leave.

Do you provide a written scope?

Yes. Surface by surface, with rate and scope, plus any optional items listed separately. Nothing is added after the work starts unless you approve a change.

Is a test patch really necessary?

It is the cheapest insurance on the job. One tile or a corner shows you the real result before you commit the whole floor.

Frequently asked questions

Call or WhatsApp for quick answers about scope, timing and guide rates for this service.

Let's restore your floors

Free inspection · written quote · Delhi NCR