Stone Tile Cleaning in Delhi NCR
Vitrified, ceramic and porcelain tiles do not fade, but the surface does. Fine scratches and cleaning residue build up into a grey haze that no amount of mopping removes, and that is what tile polishing corrects. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of tile type and surface condition
- Masking of skirting, doors and fittings
- Machine scrubbing to remove residue and grout haze
- Surface refining with matched pads
At a glance
- Vitrified & ceramic
- Grout cleaned too
- Anti-skid safe
A real before and after photo is added here for the strongest result.
What is included in stone tile cleaning service
- Free inspection of tile type and surface condition
- Masking of skirting, doors and fittings
- Machine scrubbing to remove residue and grout haze
- Surface refining with matched pads
- Grout-line cleaning as part of the same visit
- Optional gloss top-up or sealer
- Wash-down and walkthrough
- Care advice so the finish is not stripped
What each surface needs
| Tile | What we do | Result |
|---|---|---|
| Vitrified and porcelain | Scrub, de-scale, refine surface | Even satin to gloss |
| Ceramic | Deep clean and gloss top-up | Clean, lightly glossy |
| Anti-skid and textured tile | Clean only, no polishing | Safe surface preserved |
| Wood-look tile | Clean and matte finish matched | Uniform matte look |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and tile test (free)
- Masking and preparation
- Machine scrubbing and residue removal
- Surface refining and optional sealing
- Handover with gloss check
Stone Tile Cleaning Service rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Tile deep cleaning | Rs 5-15 per sq ft | Haze, residue, grout film |
| Tile polishing | Rs 15-25 per sq ft | Worn sheen, scratch haze |
| Deep restoration | Rs 25-35 per sq ft | Heavy wear and staining |
| Sealing or top-up coat | Quoted after inspection | High-traffic floors |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Post-construction floor recovery
- Cement film, mortar haze and POP splatter removed mechanically, never with acid
- Paint, adhesive and silicone residue treated before polishing
- Grout lines scrubbed free of construction dust so they do not grey out later
- Scratches from ladders and material movement polished out
- Sealing applied only after the floor has fully dried, usually a week after wet trades finish
Skipping this stage is why a newly renovated flat can look tired within months: the film left on the surface traps dust and dulls every subsequent polish.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Why clients book us
- Anti-skid and textured tiles are cleaned, never polished
- Residue stripped before any top-up, so nothing is sealed in
- Test patch shown before you commit
- One team for tile, grout, marble and granite
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Stone Tile Cleaning Service - common questions
Will polishing make my tiles slippery?
A gloss finish is smoother when wet. For bathrooms and balconies we clean and seal instead of polishing, or add an anti-skid treatment.
Do you clean grout at the same time?
Yes. Grout lines are cleaned in the same visit, because a polished floor with black grout looks unfinished.
How long does it take?
Bathrooms and kitchens finish the same day; a full apartment usually takes one working day.
Can vitrified tiles really be polished?
Yes. The surface haze is usually residue and micro-scratches, which lift with the right pads. Tiles that have lost their pattern through deep abrasion cannot be restored, and we say so after testing.
When should post-construction cleaning happen?
After wet trades finish and the floor has dried, typically five to seven days later. Sealing a damp floor traps moisture and the treatment fails.
Can cement film be removed without acid?
Yes, and it should be. Acid attacks the tile face and etches marble. Mechanical removal with correct pads and neutral cleaners takes longer but does not damage the surface.
Do you coordinate with contractors?
Yes. We can work alongside painters and carpenters, or come in at the end once they clear the site.