Sandstone Floor Tiles Polishing Sandstone and Slate Floor Cleaning in Delhi NCR
Sandstone and slate are porous, layered stones with an uneven surface that traps dust in exactly the places a mop cannot reach. Hosing them down pushes water into the layers and makes it worse. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of porosity and surface condition
- Masking of walls, skirting and fittings
- Dry removal of loose grit first
- Controlled scrubbing of the texture
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in sandstone floor tiles polishing
- Masking of walls, skirting and fittings
- Dry removal of loose grit first
- Controlled scrubbing of the texture
- pH-neutral cleaning, no acid
- Efflorescence and mineral deposit treatment
- Impregnating sealer application
- Care guidance for outdoor and indoor areas
- Free inspection of porosity and surface condition
What each surface needs
| Stone | Finish expectation | Protection |
|---|---|---|
| Sandstone | Natural matte, textured | Impregnating sealer |
| Slate (natural cleft) | Matte, layered | Sealer plus re-seal cycle |
| Slate (honed) | Smooth matte to satin | Sealer, light refresh |
| Kota / limestone | Matte or densified | Sealer or densifier |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and porosity test (free)
- Masking and dry grit removal
- Controlled wet scrubbing of the texture
- Efflorescence and stain treatment
- Sealing and handover
Sandstone Floor Tiles Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning | Rs 5-15 per sq ft | Sandstone, slate, Kota |
| Deep clean and de-scale | Rs 15-25 per sq ft | Efflorescence present |
| Cleaning with sealer | Rs 15-25 per sq ft | Recommended finish |
| Re-sealing cycle | Quoted after inspection | 12-24 months |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Booking, access and scheduling
- Inspection booked within 24-48 hours; the written quote follows the same visit
- Work usually starts within a week of approval, sooner if you are flexible on dates
- Society gate, lift, parking and working-hour rules arranged before the crew arrives
- Water point, power and work area confirmed at booking so setup takes minutes
- Occupied premises are done room by room or after hours, at no surprise premium
| Job size | Typical duration |
|---|---|
| Bathroom or kitchen | Same day |
| Single room | One working day |
| Full 2-3 BHK | One to two days |
| Lobby or commercial floor | Phased, often overnight |
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Why clients book us
- 12 years of natural stone work in Delhi NCR
- No acid on sandstone or limestone
- Dry grit removed before wet cleaning, so the floor is not scratched
- Sealer recommended instead of polishing, because the matte look is the point
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Sandstone Floor Tiles Polishing - common questions
Should sandstone be polished?
Usually not. Sandstone reads best with its natural matte finish, and polishing it only makes the surface unevenly reflective. Where a smoother finish is wanted, honing is the right process.
What are the white patches on my sandstone or slate?
Efflorescence, mineral salts pushed to the surface by moisture. It is removed with a pH-neutral treatment, and the underlying damp should be addressed or it returns.
Can slate be sealed outdoors?
Yes, with an impregnating sealer, and it will need re-sealing every twelve to twenty-four months depending on rain and foot traffic.
Is pressure washing safe?
On soft sandstone it is not, because it erodes the surface and drives water into the layers. Controlled low-pressure cleaning with the right brushes is safer.
How far in advance should I book?
A week is comfortable. During festival and wedding season, two weeks is safer because crews are booked out for hotel and banquet work.
What access do you need?
A water point, a working power socket, and a clear route for the machines. Society permission for lift use is helpful for upper floors.
Can the job be split across weekends?
Yes. Many clients do one or two rooms each weekend. We keep the same rate per sq ft and you are not billed twice for travel within the same batch.
