Quarry Tile Polishing in Delhi NCR
Most tile floors in Delhi NCR look dull because the protective factory sheen has worn through in walking routes. We clean the surface properly, then refine it so the tile reads evenly again. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection with a residue test
- Masking of skirting and furniture edges
- pH-neutral deep cleaning, no acid
- Residue and soap film stripping
At a glance
- Vitrified & ceramic
- Grout cleaned too
- Anti-skid safe
A real before and after photo is added here for the strongest result.
What is included in quarry tile polishing
- Free inspection with a residue test
- Masking of skirting and furniture edges
- pH-neutral deep cleaning, no acid
- Residue and soap film stripping
- Grout-line and edge cleaning
- Stain treatment where present
- Optional polishing if the surface needs it
- Drying and care guidance
What each surface needs
| Test | What it means | Correct job |
|---|---|---|
| Wipes clean, still grey | Surface is worn | Polishing needed |
| Feels tacky or streaky | Residue build-up | Deep cleaning only |
| Local dark patches | Stains | Stain treatment |
| White marks near taps | Hard water scale | De-scale and neutral clean |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and residue test (free)
- Masking and preparation
- pH-neutral deep clean and stripping
- Joint and edge cleaning
- Handover with a cleaning routine for daily care
Quarry Tile Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning | Rs 5-15 per sq ft | Residue and soil |
| Deep clean with stain treatment | Rs 15-25 per sq ft | Oil, rust, scale |
| Cleaning plus polishing | Rs 25-35 per sq ft | Worn surface |
| Sealing after cleaning | Quoted after inspection | Optional |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
What improves, and what cannot be fixed
| Condition | Realistic outcome |
|---|---|
| Dull, even wear | Full gloss returns, looks new |
| Scratch lanes in walkways | Removed, surface level again |
| Light etching and hard water | Removed with polishing |
| Deep etching or acid burns | Faint mark may remain |
| Cracked or hollow slabs | Needs replacement, not polishing |
| Stains soaked through the slab | Lightened, not erased |
We show you this on a test patch before quoting the full job, so the result you see at handover is the result you were promised.
Waste is removed the same day. Slurry, stripped residue, used pads and packaging leave with the crew instead of going into society bins or being left for you to dispose of.
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Why clients book us
- 12 years of stone cleaning in Delhi NCR
- Residue test done first, so you pay only for the job you need
- pH-neutral products on all calcite stone
- Honest advice when cleaning alone is not enough
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Quarry Tile Polishing - common questions
Do I need cleaning or polishing?
Test one patch with a clean damp cloth. If it wipes clean but still looks grey, the surface is worn and needs polishing. If the cloth comes away dirty or the floor is streaky, it needs deep cleaning.
How often should marble be deep cleaned?
Every six to twelve months in homes, and every three to six months in commercial spaces. Daily mopping with the wrong product makes build-up worse, not better.
Which cleaner should we use daily?
A pH-neutral stone cleaner with clean water, and dry the surface afterwards. Acid and abrasive cleaners damage polished marble within a few uses.
Can cleaning remove white patches near taps?
Hard-water scale yes, with a descaling clean. Etch marks caused by acid need light grinding and polishing, which is a different job.
Can the floor look exactly new again?
On sound stone with surface wear, yes. Where damage has gone deeper, such as acid burns or stains soaked through the slab, the result is a major improvement rather than perfection, and we tell you which one to expect before starting.
Why do some floors come back brighter than others?
Stone type and previous care. White and hard marbles take a higher gloss; softer or previously acid-washed floors top out lower. Consistent cleaning products are what keep the difference from widening.
Do you guarantee the same result on every surface?
No, and no honest contractor should. A mixed floor gets one uniform gloss level chosen after testing each surface, which sometimes means a satin finish rather than mirror.