Marble Tiles Polishing Tile Polishing in Delhi NCR
Most tile floors in Delhi NCR look dull because the protective factory sheen has worn through in walking routes. We clean the surface properly, then refine it so the tile reads evenly again. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of tile type and surface condition
- Masking of skirting, doors and fittings
- Machine scrubbing to remove residue and grout haze
- Surface refining with matched pads
At a glance
- Vitrified & ceramic
- Grout cleaned too
- Anti-skid safe
A real before and after photo is added here for the strongest result.
What is included in marble tiles polishing
- Free inspection of tile type and surface condition
- Masking of skirting, doors and fittings
- Machine scrubbing to remove residue and grout haze
- Surface refining with matched pads
- Grout-line cleaning as part of the same visit
- Optional gloss top-up or sealer
- Wash-down and walkthrough
- Care advice so the finish is not stripped
What each surface needs
| Tile | What we do | Result |
|---|---|---|
| Vitrified and porcelain | Scrub, de-scale, refine surface | Even satin to gloss |
| Ceramic | Deep clean and gloss top-up | Clean, lightly glossy |
| Anti-skid and textured tile | Clean only, no polishing | Safe surface preserved |
| Wood-look tile | Clean and matte finish matched | Uniform matte look |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and tile test (free)
- Masking and preparation
- Machine scrubbing and residue removal
- Surface refining and optional sealing
- Handover with gloss check
Marble Tiles Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Tile deep cleaning | Rs 5-15 per sq ft | Haze, residue, grout film |
| Tile polishing | Rs 15-25 per sq ft | Worn sheen, scratch haze |
| Deep restoration | Rs 25-35 per sq ft | Heavy wear and staining |
| Sealing or top-up coat | Quoted after inspection | High-traffic floors |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Buff or full polish? A straight answer
| Condition of the floor | Correct job | Why |
|---|---|---|
| Dull but even, no scratches | Buff only | Surface is sound, only the sheen is lost |
| Light scratches and lane wear | Diamond polish | Surface layer needs refining |
| Visible lippage or deep scratches | Grinding plus polish | Buffing cannot level stone |
| Wax or polish residue build-up | Strip, then polish | New finish will not bond over residue |
Buffing is the cheaper option and we will tell you when it is enough. Selling a full polish for a floor that only needed a buff is how a contractor gets a bad name.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Why clients book us
- 12 years of tile and stone work in Delhi NCR
- Anti-skid and textured tiles are cleaned, never polished
- Residue stripped before any top-up, so nothing is sealed in
- Test patch shown before you commit
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Tiles Polishing - common questions
Will polishing make my tiles slippery?
A gloss finish is smoother when wet. For bathrooms and balconies we clean and seal instead of polishing, or add an anti-skid treatment.
Do you clean grout at the same time?
Yes. Grout lines are cleaned in the same visit, because a polished floor with black grout looks unfinished.
How long does it take?
Bathrooms and kitchens finish the same day; a full apartment usually takes one working day.
Can vitrified tiles really be polished?
Yes. The surface haze is usually residue and micro-scratches, which lift with the right pads. Tiles that have lost their pattern through deep abrasion cannot be restored, and we say so after testing.
How do I know if buffing is enough?
If the floor is evenly dull with no visible scratch pattern, a buff usually restores it. If you can see lanes, scratches or a step between slabs, it needs polishing or grinding, and we show you why on a test patch.
Is buffing a waste of money then?
Not at all. It is the correct maintenance step for a sound floor and costs a fraction of a full job. It becomes a waste only when the surface damage needs something deeper.
Can you do a test patch first?
Yes, on every job. One tile or a corner, so you judge the actual result before committing to the whole floor.