Marble Tile Polishing Tile Polishing in Delhi NCR
Most tile floors in Delhi NCR look dull because the protective factory sheen has worn through in walking routes. We clean the surface properly, then refine it so the tile reads evenly again. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of tile type and surface condition
- Masking of skirting, doors and fittings
- Machine scrubbing to remove residue and grout haze
- Surface refining with matched pads
At a glance
- Vitrified & ceramic
- Grout cleaned too
- Anti-skid safe
A real before and after photo is added here for the strongest result.
What is included in marble tile polishing
- Surface refining with matched pads
- Grout-line cleaning as part of the same visit
- Optional gloss top-up or sealer
- Wash-down and walkthrough
- Care advice so the finish is not stripped
- Free inspection of tile type and surface condition
- Masking of skirting, doors and fittings
- Machine scrubbing to remove residue and grout haze
What each surface needs
| Tile | What we do | Result |
|---|---|---|
| Vitrified and porcelain | Scrub, de-scale, refine surface | Even satin to gloss |
| Ceramic | Deep clean and gloss top-up | Clean, lightly glossy |
| Anti-skid and textured tile | Clean only, no polishing | Safe surface preserved |
| Wood-look tile | Clean and matte finish matched | Uniform matte look |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and tile test (free)
- Masking and preparation
- Machine scrubbing and residue removal
- Surface refining and optional sealing
- Handover with gloss check
Marble Tile Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Tile deep cleaning | Rs 5-15 per sq ft | Haze, residue, grout film |
| Tile polishing | Rs 15-25 per sq ft | Worn sheen, scratch haze |
| Deep restoration | Rs 25-35 per sq ft | Heavy wear and staining |
| Sealing or top-up coat | Quoted after inspection | High-traffic floors |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Marble and granite need different treatment
| Marble | Granite | |
|---|---|---|
| Hardness | Softer, scratches more visibly | Harder, resists scratches |
| Acid | Etches immediately, never use | Dulls the surface, avoid |
| Finishing | Diamond pads up to 3000 grit | Its own pad set and compounds |
| Typical aftercare | Sealer every 12-24 months | Sealer on kitchen and stairs |
| Gloss achievable | Very high on hard whites | Deep lustre, not mirror |
We keep separate pad sets and compounds for each, because using marble products on granite (or the reverse) is the fastest way to end up with a hazy surface.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.
Why clients book us
- Anti-skid and textured tiles are cleaned, never polished
- Residue stripped before any top-up, so nothing is sealed in
- Test patch shown before you commit
- One team for tile, grout, marble and granite
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Tile Polishing - common questions
Can vitrified tiles really be polished?
Yes. The surface haze is usually residue and micro-scratches, which lift with the right pads. Tiles that have lost their pattern through deep abrasion cannot be restored, and we say so after testing.
Will polishing make my tiles slippery?
A gloss finish is smoother when wet. For bathrooms and balconies we clean and seal instead of polishing, or add an anti-skid treatment.
Do you clean grout at the same time?
Yes. Grout lines are cleaned in the same visit, because a polished floor with black grout looks unfinished.
How long does it take?
Bathrooms and kitchens finish the same day; a full apartment usually takes one working day.
Can you polish a floor that mixes marble and granite?
Yes, and it is common in lobbies and staircases. Each surface is polished to a matching level of sheen rather than the same pad sequence, so the two read as one floor.
Is granite easier to maintain than marble?
It is less acid-sensitive and harder, so it stains and scratches less. It still dulls from repeated wrong cleaning, and it still needs sealing in wet or greasy areas.
Why does marble etch while granite does not?
Marble is calcium-based, so acid dissolves the surface and leaves a white mark. Granite is silicate-based and resists acid better, though strong acid still dulls its polish.