Ceramic Tile Floors Polishing Tile Polishing in Delhi NCR
Most tile floors in Delhi NCR look dull because the protective factory sheen has worn through in walking routes. We clean the surface properly, then refine it so the tile reads evenly again. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of tile type and surface condition
- Masking of skirting, doors and fittings
- Machine scrubbing to remove residue and grout haze
- Surface refining with matched pads
At a glance
- Vitrified & ceramic
- Grout cleaned too
- Anti-skid safe
A real before and after photo is added here for the strongest result.
What is included in ceramic tile floors polishing
- Masking of skirting, doors and fittings
- Machine scrubbing to remove residue and grout haze
- Surface refining with matched pads
- Grout-line cleaning as part of the same visit
- Optional gloss top-up or sealer
- Wash-down and walkthrough
- Care advice so the finish is not stripped
- Free inspection of tile type and surface condition
What each surface needs
| Tile | What we do | Result |
|---|---|---|
| Vitrified and porcelain | Scrub, de-scale, refine surface | Even satin to gloss |
| Ceramic | Deep clean and gloss top-up | Clean, lightly glossy |
| Anti-skid and textured tile | Clean only, no polishing | Safe surface preserved |
| Wood-look tile | Clean and matte finish matched | Uniform matte look |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and tile test (free)
- Masking and preparation
- Machine scrubbing and residue removal
- Surface refining and optional sealing
- Handover with gloss check
Ceramic Tile Floors Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Tile deep cleaning | Rs 5-15 per sq ft | Haze, residue, grout film |
| Tile polishing | Rs 15-25 per sq ft | Worn sheen, scratch haze |
| Deep restoration | Rs 25-35 per sq ft | Heavy wear and staining |
| Sealing or top-up coat | Quoted after inspection | High-traffic floors |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Keeping the finish after the job is done
| Habit | Why it matters |
|---|---|
| Dry dust mopping | Removes grit before it scratches the surface |
| pH-neutral cleaner only | Acid etches marble and bleach dulls the finish |
| Damp mop, never flooding | Standing water leaves marks and weakens joints |
| Mats at entries | Captures grit where it enters |
| Felt pads under furniture | Stops drag marks on polished surfaces |
- A light maintenance polish every 12-18 months keeps gloss without a full job
- Commercial floors are usually re-polished annually, homes every two years
- Sealer or nano coating, where applied, is refreshed on the schedule we hand over
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Why clients book us
- 12 years of tile and stone work in Delhi NCR
- Anti-skid and textured tiles are cleaned, never polished
- Residue stripped before any top-up, so nothing is sealed in
- Test patch shown before you commit
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Ceramic Tile Floors Polishing - common questions
Can vitrified tiles really be polished?
Yes. The surface haze is usually residue and micro-scratches, which lift with the right pads. Tiles that have lost their pattern through deep abrasion cannot be restored, and we say so after testing.
Will polishing make my tiles slippery?
A gloss finish is smoother when wet. For bathrooms and balconies we clean and seal instead of polishing, or add an anti-skid treatment.
Do you clean grout at the same time?
Yes. Grout lines are cleaned in the same visit, because a polished floor with black grout looks unfinished.
How long does it take?
Bathrooms and kitchens finish the same day; a full apartment usually takes one working day.
How often does the floor need a maintenance polish?
Every 12-18 months for homes and every 8-12 months for commercial floors. It is a much smaller job than the original restoration.
Which cleaner should we use?
A pH-neutral stone cleaner with clean water, dried after mopping. Avoid acid, bleach and abrasive powders, which are the main causes of dull and etched floors.
Can maintenance work be done room by room?
Yes. We schedule it in sections so the house stays usable, and it takes a fraction of the time of a full polish.