Carrara Marble Tile Polishing Tile Polishing in Delhi NCR
Vitrified, ceramic and porcelain tiles do not fade, but the surface does. Fine scratches and cleaning residue build up into a grey haze that no amount of mopping removes, and that is what tile polishing corrects. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of tile type and surface condition
- Masking of skirting, doors and fittings
- Machine scrubbing to remove residue and grout haze
- Surface refining with matched pads
At a glance
- Vitrified & ceramic
- Grout cleaned too
- Anti-skid safe
A real before and after photo is added here for the strongest result.
What is included in carrara marble tile polishing
- Machine scrubbing to remove residue and grout haze
- Surface refining with matched pads
- Grout-line cleaning as part of the same visit
- Optional gloss top-up or sealer
- Wash-down and walkthrough
- Care advice so the finish is not stripped
- Free inspection of tile type and surface condition
- Masking of skirting, doors and fittings
What each surface needs
| Tile | What we do | Result |
|---|---|---|
| Vitrified and porcelain | Scrub, de-scale, refine surface | Even satin to gloss |
| Ceramic | Deep clean and gloss top-up | Clean, lightly glossy |
| Anti-skid and textured tile | Clean only, no polishing | Safe surface preserved |
| Wood-look tile | Clean and matte finish matched | Uniform matte look |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and tile test (free)
- Masking and preparation
- Machine scrubbing and residue removal
- Surface refining and optional sealing
- Handover with gloss check
Carrara Marble Tile Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Tile deep cleaning | Rs 5-15 per sq ft | Haze, residue, grout film |
| Tile polishing | Rs 15-25 per sq ft | Worn sheen, scratch haze |
| Deep restoration | Rs 25-35 per sq ft | Heavy wear and staining |
| Sealing or top-up coat | Quoted after inspection | High-traffic floors |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
What a proper job must include
| Stage | Non-negotiable |
|---|---|
| Before starting | Gloss reading, damage map, hidden test patch, written rate |
| Preparation | Skirting, fittings and furniture edges masked |
| During | Correct pad sequence for the stone, no skipped grits |
| Finishing | Edges and corners hand-done, not left dull |
| Handover | Walkthrough with you, after-care note, waste removed |
Use this list to compare any quote you receive, ours included. If a contractor skips the test patch or the handover walkthrough, the finish will show it within weeks.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.
Why clients book us
- Anti-skid and textured tiles are cleaned, never polished
- Residue stripped before any top-up, so nothing is sealed in
- Test patch shown before you commit
- One team for tile, grout, marble and granite
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Carrara Marble Tile Polishing - common questions
Can vitrified tiles really be polished?
Yes. The surface haze is usually residue and micro-scratches, which lift with the right pads. Tiles that have lost their pattern through deep abrasion cannot be restored, and we say so after testing.
Will polishing make my tiles slippery?
A gloss finish is smoother when wet. For bathrooms and balconies we clean and seal instead of polishing, or add an anti-skid treatment.
Do you clean grout at the same time?
Yes. Grout lines are cleaned in the same visit, because a polished floor with black grout looks unfinished.
How long does it take?
Bathrooms and kitchens finish the same day; a full apartment usually takes one working day.
What should I check before paying?
That every surface you were quoted for has been finished, that edges and corners are not dull, that joints are clean and that the waste has been removed. Walk the floor with the crew still present, not after they leave.
Do you provide a written scope?
Yes. Surface by surface, with rate and scope, plus any optional items listed separately. Nothing is added after the work starts unless you approve a change.
Is a test patch really necessary?
It is the cheapest insurance on the job. One tile or a corner shows you the real result before you commit the whole floor.