Marble & floor polishing - Delhi NCR WhatsApp Request inspection +91 86070 01043 Email

Carpet Tile Maintenance in Delhi NCR

Office carpet tiles and upholstery get cleaned on a schedule, not when they look bad. A planned cycle keeps the space presentable and stops odour building up in the pile. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit ca???

  • Free fabric and fibre check
  • Dry vacuuming of loose grit
  • Fabric test on a hidden area
  • Pre-spray on traffic lanes and armrests
Carpet Tile Maintenance in Delhi NCR
Professional equipment Klindex, Taski, diamond pads 60–3000
Diamond technology Graded steps matched to stone
Transparent quotation Written quote after inspection
Comprehensive services Marble, granite, tile & wood
Floor before polishing
Before
Floor after polishing
After

The results speak for themselves

See the difference professional polishing makes

Diamond-grade pads and staged honing restore clarity and slip-safe gloss — without replacing good stone. Every job starts with a test patch so you approve the finish before full-area work.

Our polishing process

1

Inspection

Site visit, moisture and scratch check

2

Grinding

Level uneven areas when required

3

Joint filling

Fill pits and open joints if needed

4

Honing & polishing

Diamond grit sequence to target gloss

5

Final finishing

Silicate, epoxy or nano if quoted

6

Handover

Walk-through and care advice

Related services

Suitable for

ApartmentsVillasOfficesHotelsShowroomsHospitals

Marble polishing services across Delhi NCR

Full service information

Carpet, Sofa and Chair Care · Delhi NCR

Carpet Tile Carpet, Sofa and Chair Cleaning in Delhi NCR

Office carpet tiles and upholstery get cleaned on a schedule, not when they look bad. A planned cycle keeps the space presentable and stops odour building up in the pile. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.

  • Free fabric and fibre check
  • Dry vacuuming of loose grit
  • Fabric test on a hidden area
  • Pre-spray on traffic lanes and armrests

Book a free on-site inspection

At a glance

  • Fabric matched
  • Seams hand finished
  • After-hours slots

A real before and after photo is added here for the strongest result.

What is included in carpet tile maintenance

  • Dry vacuuming of loose grit
  • Fabric test on a hidden area
  • Pre-spray on traffic lanes and armrests
  • Low-moisture foam or extraction wash
  • Seam and edge hand finishing
  • Odour neutralising treatment on request
  • Air movers and furniture protection
  • Free fabric and fibre check

What each surface needs

ItemMethodDrying time
Carpet tiles (office)Extraction with pre-spray4-5 hours
Fabric sofa and chairsLow-moisture foam, hand finished3-4 hours
Office chairsFoam clean, spot treatment2-3 hours
LeatheretteSurface clean and condition1 hour

Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.

How the job runs

  1. Inspection and fabric test (free)
  2. Furniture moved and protected
  3. Pre-treatment of lanes, seats and arms
  4. Clean and extract, then rinse
  5. Air movers on and walkthrough

Carpet Tile Maintenance rates in Delhi NCR

ItemPricingNotes
Carpet tile cleaningPer sq ftVolume rates for offices
Sofa cleaningPer seat3-seater, L-shape, recliners
Chair shampooingPer chairTask and office chairs
Mattress cleaningPer sideDust-mite focus

Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.

The process, step by step

  1. Site inspection, gloss reading and hidden test patch
  2. Masking of skirting, fittings, doors and furniture edges
  3. Residue and old polish stripping where present
  4. Grinding if lippage or deep damage is found
  5. Progressive polishing through the grit sequence
  6. Optional silicate, crystallisation, epoxy or nano finish
  7. Edge and corner hand work
  8. Wash-down, walkthrough and care guidance

Each stage is completed on the whole area before the next one starts, so the floor never ends up with a bright patch next to an unfinished section.

After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.

Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.

Why clients book us

  • Fabric-matched products so wool and viscose are not over-wet
  • After-hours and overnight slots for offices
  • Air movers so rooms are usable the same day
  • Odour treatment included where pets or damp are involved

Serving Delhi NCR and nearby areas

Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.

Book a free on-site inspection

Carpet Tile Maintenance - common questions

Will the foam leave marks or rings on upholstery?

No, when it is extracted and hand finished at the seams. Rings come from poor rinsing, which is why we do a rinse pass rather than a single wipe.

How often should sofas be cleaned?

Once a year for homes, or twice if anyone has dust or pollen allergies. Offices and restaurants clean upholstery every 3-4 months.

Is leatherette cleaned the same way as fabric?

No. Leatherette and leather are surface-cleaned and conditioned, never soaked, because water damages the backing.

Can you clean office carpet tiles overnight?

Yes. After-hours and overnight slots are normal so the space is ready before the next shift. You only need to arrange power and water access.

How long does each step take?

As a guide, preparation is under an hour, grinding runs 25-40 minutes per 100 sq ft, polishing 15-25 minutes, and finishing plus clean-up about an hour. Bigger areas are scheduled over more days.

Can steps be skipped to save money?

Not safely. Skipping grit stages is the most common shortcut and shows up as scratch haze within weeks. If you want to reduce cost, reduce the area covered this cycle, not the process.

Do you work in one room or the whole floor at a time?

Room by room if you are living in, whole floor if the house is empty, which produces a more even finish because lighting and drying are consistent.

Frequently asked questions

Call or WhatsApp for quick answers about scope, timing and guide rates for this service.

Let's restore your floors

Free inspection · written quote · Delhi NCR