Marble & floor polishing - Delhi NCR WhatsApp Request inspection +91 86070 01043 Email

Tile Floor Cleaning Company in Delhi NCR

Most tile floors in Delhi NCR look dull because the protective factory sheen has worn through in walking routes. We clean the surface properly, then refine it so the tile reads evenly again. Delhi NCR mixes very old housing stock with new high-rise towers, ???

  • Photographed damage map and gloss reading
  • Test patch on a hidden area before full approval
  • Acid-proof masking of skirting, walls and fittings
  • Sequential diamond passes at controlled speed
Tile Floor Cleaning Company in Delhi NCR
Professional equipment Klindex, Taski, diamond pads 60–3000
Diamond technology Graded steps matched to stone
Transparent quotation Written quote after inspection
Comprehensive services Marble, granite, tile & wood
Floor before polishing
Before
Floor after polishing
After

The results speak for themselves

See the difference professional polishing makes

Diamond-grade pads and staged honing restore clarity and slip-safe gloss — without replacing good stone. Every job starts with a test patch so you approve the finish before full-area work.

Our polishing process

1

Inspection

Site visit, moisture and scratch check

2

Grinding

Level uneven areas when required

3

Joint filling

Fill pits and open joints if needed

4

Honing & polishing

Diamond grit sequence to target gloss

5

Final finishing

Silicate, epoxy or nano if quoted

6

Handover

Walk-through and care advice

Related services

Suitable for

ApartmentsVillasOfficesHotelsShowroomsHospitals

Marble polishing services across Delhi NCR

Full service information

Tile Polishing · Delhi NCR

Tile Floor Cleaning in Delhi NCR

Most tile floors in Delhi NCR look dull because the protective factory sheen has worn through in walking routes. We clean the surface properly, then refine it so the tile reads evenly again. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.

  • Photographed damage map and gloss reading
  • Test patch on a hidden area before full approval
  • Acid-proof masking of skirting, walls and fittings
  • Sequential diamond passes at controlled speed

Book your free inspection

At a glance

  • Vitrified & ceramic
  • Grout cleaned too
  • Anti-skid safe

A real before and after photo is added here for the strongest result.

What is included in tile floor cleaning company

  • Photographed damage map and gloss reading
  • Test patch on a hidden area before full approval
  • Acid-proof masking of skirting, walls and fittings
  • Sequential diamond passes at controlled speed
  • Vein-safe polishing and hand-finished edges
  • pH-neutral deep clean before finishing
  • Sealer, silicate or nano coating on request
  • Written after-care rules for the first month

What each surface needs

MarbleCharacterWhat to watch for
StatuarioWhite with bold grey veiningEtches fast, needs prompt spill control
CarraraSoft white, subtle greySofter stone, dulls quickly in entries
CalacattaWarm white with gold veinsNeeds gentle pads to avoid vein bleeding
Perlatino and BotticinoWarm beige with fine veinsYellowing if filled slabs are over-polished

Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.

How the job runs

  1. Identify the marble type and check for resin filling (free)
  2. Masking with acid-proof covering
  3. Diamond passes at controlled speed, 30-45 minutes per 100 sq ft
  4. Polish to the agreed gloss, then seal or coat if required
  5. Before and after comparison plus a list of products never to use

Tile Floor Cleaning Company rates in Delhi NCR

WorkGuide bandTypical case
Maintenance polishRs 5-15 per sq ftLight dulling, sound floor
Diamond polish to restore glossRs 15-25 per sq ftTraffic lanes, mop haze
Deep polish with crystallisationRs 25-35 per sq ftHeavy wear, etching, patchiness
Sealing or nano coatingQuoted after inspectionKitchens, entries, high traffic

Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.

Looking after the finish

TimeframeWhat to do
First 24 hoursStay off coated areas, keep furniture off the floor
First weekDry mop only, no wet mopping, no chemical cleaners
OngoingpH-neutral cleaner, damp mop, dry after
Every 12-18 monthsLight maintenance polish to hold the gloss
  • Never use acid, bleach, vinegar or abrasive powder on stone
  • Wipe spills promptly, particularly lemon, tea and oil
  • Use felt pads on furniture and mats at entry points
  • Keep planters and metal legs off wet floors to prevent rust rings

Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.

Machines are matched to the job. A 400 mm single-disc machine for open floors, edge machines for skirtings and staircases, and hand blocks for corners and thresholds where a machine cannot safely reach.

Team composition is consistent: a supervisor plus two machine operators on standard jobs, with additional hands for staircases, multiple floors or tight access. The same supervisor stays with the job start to finish.

Why clients book us

  • Lower heat and pressure on resin-filled slabs to prevent yellowing
  • One gloss standard across the whole floor, no patch looks newer
  • Silicate, epoxy and Akemi nano products in stock
  • 12 years across Delhi NCR including villa, hotel and showroom projects

Serving Delhi NCR and nearby areas

Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.

Book your free inspection

Tile Floor Cleaning Company - common questions

Will polishing change the pattern?

No. Diamond polishing removes the damaged top layer; it does not bleach or alter the veining. On filled slabs we work at lower speed specifically to avoid yellowing.

Can yellowed Italian marble be corrected?

Polish residue and hard-water film lift during diamond polishing. Yellowing inside a filled slab is internal and cannot be polished out, so we test a patch and tell you the realistic outcome first.

How often does it need polishing?

Homes every 18-24 months with neutral cleaning. Lobbies, showrooms and entries every 8-12 months, longer with a sealer or nano coating.

Is a sealer worth it?

Yes in working areas. It slows absorption of oil, tea and coloured liquids, which buys time to wipe a spill, and needs refreshing every 12-24 months.

Why does Italian marble dull faster than Indian marble?

It is usually the cleaning, not the stone. White imported marbles are calcium-based, so acidic cleaners and lemon juice etch the surface and leave white patches within days. A pH-neutral cleaner and clean-water mopping solves most of it.

What should I avoid in the first week?

Wet mopping, chemical floor cleaners, dragging furniture and placing potted plants back on the floor. Dry mopping and clean water only until the finish settles.

Which cleaner do you recommend?

Any pH-neutral stone cleaner, used with clean water and followed by drying. That single habit prevents most of the dullness and staining we are called back to fix.

What voids the finish durability?

Acid and abrasive cleaning. A floor polished this month can look dull in eight weeks if it is mopped with an acidic general-purpose cleaner.

Frequently asked questions

Call or WhatsApp for quick answers about scope, timing and guide rates for this service.

Let's restore your floors

Free inspection · written quote · Delhi NCR