Wooden Floor Polishing in Delhi NCR
If your wood floor looks pale in the middle of the room but fine at the edges, the finish has simply worn through in the traffic path. Re-coating that path alone leaves a visible patch, which is why we do the whole room. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection including slab-thickness and hollow check
- Masking and furniture protection
- Grinding where lippage or deep scratches exist
- Graded diamond polishing to the stone hardness
At a glance
- Dust-controlled
- Gap filling
- PU / melamine / oil
A real before and after photo is added here for the strongest result.
What is included in hardwood floor sanding and polishing
- Free inspection including slab-thickness and hollow check
- Masking and furniture protection
- Grinding where lippage or deep scratches exist
- Graded diamond polishing to the stone hardness
- Old polish and wax residue removal
- Stain treatment for oil, rust and hard water
- Silicate or crystallisation option
- Wash-down and walkthrough
What each surface needs
| Stone | Hardness | Best finish |
|---|---|---|
| Makrana white | Medium-hard, takes high gloss | Mirror gloss |
| Katni and Jaisalmer | Softer, colour sensitive | Satin to medium gloss |
| Rajnagar and green marble | Hard, banded | Gloss with even banding |
| Kota and other flagstone | Hard, matte by nature | Densified gloss or matte |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and slab check (free)
- Masking and preparation
- Grinding if lippage or residue is present
- Diamond polishing matched to stone hardness
- Handover with gloss check and care advice
Hardwood Floor Sanding And Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Buff and polish | Rs 5-15 per sq ft | Light dullness |
| Diamond polishing | Rs 15-25 per sq ft | Scratches, dull lanes |
| Grinding plus deep polish | Rs 25-35 per sq ft | Lippage, heavy wear |
| Silicate or coating | Quoted after inspection | Longer gloss life |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Tiles or marble: what each one needs
| Tiles (vitrified, ceramic) | Marble | |
|---|---|---|
| What dulls | Surface residue and micro-scratches | Worn polished layer, etching |
| Restoring it | Deep clean, surface refine | Grinding and diamond polishing |
| Staining | Grout lines first | Stone surface and joints |
| Slip risk | High on glossy tile when wet | High on mirror-polished stone |
| Best finish for wet areas | Clean plus anti-skid | Satin plus anti-skid |
In most homes both are present in the same flat, which is why we quote surface by surface instead of giving one blended rate.
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.
Water and power are the two site requirements. We need one working socket within reach of a lead and a water point; everything else, including masking material and waste bags, comes with the crew.
Why clients book us
- 12 years of Indian marble and stone work in Delhi NCR
- Slab thickness and hollowness checked before any grinding
- Residue stripped so the new finish bonds to stone, not to old wax
- Correct grit sequence per stone hardness
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Hardwood Floor Sanding And Polishing - common questions
Can old polish and wax be removed?
Yes. Grinding strips the residue layer completely. That is the only way a new polish bonds to the stone instead of sitting on top of old compound.
Will grinding change the colour of my floor?
It restores the original colour by removing the worn and stained top layer. Floors that have faded unevenly across rooms come back to one uniform shade.
How long does it take?
Most apartments are ground and polished in one to two days, and the floor is walkable the same evening as the final pass.
Do you polish Makrana that has gone grey?
Yes. Greyness is normally surface dirt, mop haze and worn polish. It lifts with grinding and polishing, and we show you a test patch on a hidden corner first.
Does Indian marble need the same treatment as Italian marble?
No. Indian marbles such as Makrana, Katni and Rajnagar are generally harder and less acid-sensitive. They take a different grit sequence and more grinding pressure, but the same acid-free cleaning discipline still applies.
Can tiles be polished like marble?
Tiles are refined and cleaned, not ground like stone. Polishing a vitrified tile past its factory finish wears the surface, so we clean and seal instead, or polish only where the tile type allows it.
Which is better for a bathroom floor?
Neither should be mirror-glossy when wet. Tile with anti-skid treatment, or honed stone with anti-skid, is the safer and more practical choice.
Do floors with both need separate visits?
No. One crew handles tiles, grout and stone in the same visit, which also avoids the joint line between two trades becoming anyone's excuse.