Marble & floor polishing - Delhi NCR WhatsApp Request inspection +91 86070 01043 Email

Cost to Refinish Travertine Floors in Delhi NCR

The holes and pits in travertine hold dirt that a mop cannot lift. Cleaning has to reach into the texture, and any polishing afterwards is done as a light hone so the stone keeps its natural look. Delhi NCR mixes very old housing stock with new high-rise to???

  • Free inspection of fill, pits and finish
  • Masking of walls and fittings
  • pH-neutral cleaning only
  • Filler touch-up on open pits
Cost to Refinish Travertine Floors in Delhi NCR
Professional equipment Klindex, Taski, diamond pads 60–3000
Diamond technology Graded steps matched to stone
Transparent quotation Written quote after inspection
Comprehensive services Marble, granite, tile & wood
Floor before polishing
Before
Floor after polishing
After

The results speak for themselves

See the difference professional polishing makes

Diamond-grade pads and staged honing restore clarity and slip-safe gloss — without replacing good stone. Every job starts with a test patch so you approve the finish before full-area work.

Our polishing process

1

Inspection

Site visit, moisture and scratch check

2

Grinding

Level uneven areas when required

3

Joint filling

Fill pits and open joints if needed

4

Honing & polishing

Diamond grit sequence to target gloss

5

Final finishing

Silicate, epoxy or nano if quoted

6

Handover

Walk-through and care advice

Related services

Suitable for

ApartmentsVillasOfficesHotelsShowroomsHospitals

Marble polishing services across Delhi NCR

Full service information

Travertine and Limestone · Delhi NCR

To Refinish Travertine Floors Travertine and Limestone Cleaning in Delhi NCR

The holes and pits in travertine hold dirt that a mop cannot lift. Cleaning has to reach into the texture, and any polishing afterwards is done as a light hone so the stone keeps its natural look. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.

  • Free inspection of fill, pits and finish
  • Masking of walls and fittings
  • pH-neutral cleaning only
  • Filler touch-up on open pits

Request a free site check

At a glance

  • 12 years experience
  • 600+ projects a year
  • Written rates

A real before and after photo is added here for the strongest result.

What is included in cost to refinish travertine floors

  • Free inspection of fill, pits and finish
  • Masking of walls and fittings
  • pH-neutral cleaning only
  • Filler touch-up on open pits
  • Light honing to even the surface
  • Stain and efflorescence treatment
  • Impregnating sealer application
  • Care guidance for daily cleaning

What each surface needs

SurfaceCorrect approachNever use
TravertineNeutral clean, hone, sealAcid cleaners
LimestoneNeutral clean, sealAcid and abrasive pads
Honed marbleNeutral clean, light polishAcid and bleach
Pitted areasClean into the pits, refillHigh-pressure washing

Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.

How the job runs

  1. Inspection and pH test (free)
  2. Masking of surrounding surfaces
  3. Neutral cleaning of the texture
  4. Filler touch-up and light honing
  5. Sealing and handover

Cost To Refinish Travertine Floors rates in Delhi NCR

WorkGuide bandNotes
Deep cleaningRs 5-15 per sq ftNeutral products
Cleaning and honingRs 15-25 per sq ftEvening the surface
Filler touch-upPer patchOpen pits and holes
SealingQuoted after inspectionImpregnating sealer

Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.

What changes the price for cost to refinish travertine floors in Delhi NCR

FactorEffect on rateWhat to expect
Total areaBigger areas cost less per sq ftSlab rates above 1,000 sq ft
Damage depthGrinding raises the rateDecided by the test patch
Stone typeImported and filled slabs take longerSee the surface table
AccessUpper floors and corners take longerConfirmed before booking

Ask for one written rate per surface. A single number for the whole house without an inspection always changes later.

How to get a quote that does not change

  • WhatsApp photos of the dullest area and the worst stain speed up the first estimate
  • A free on-site inspection gives the final figure, because gloss readings and damage depth cannot be judged from a photo
  • The written quote lists surface by surface: area, rate, scope and exclusions
  • Coatings, crack repairs and slab replacement appear as separate optional lines
  • The figure is valid for thirty days unless you ask us to hold it longer

If a contractor quotes a single number for a whole house without inspecting it, that number will change once work starts. We would rather quote after looking.

Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.

Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.

Why clients book us

  • Impregnating sealer offered but not oversold
  • Test patch on a hidden area first
  • 12 years of natural stone work in Delhi NCR
  • Acid-free on all calcite stone, without exception

Serving Delhi NCR and nearby areas

Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.

Request a free site check

Cost To Refinish Travertine Floors - common questions

Why is acid so damaging to travertine?

Travertine and limestone are calcium-based. Acid dissolves the surface binder, which leaves white etch marks and opens the texture, and the damage is permanent unless the surface is honed back.

Will cleaning remove dirt from the pits?

Yes, with the right brushes and neutral cleaner, but the pits will refill over time. Filling open pits at the same visit is the practical fix.

Can travertine be polished to a shine?

It can be honed or lightly polished, but a mirror finish on soft, pitted stone is neither natural nor durable. We usually recommend a honed finish with sealer.

How often should it be sealed?

Every twelve to twenty-four months for floors, and more often in wet areas. Sealer slows absorption rather than blocking it.

Is the price negotiable?

The rate per sq ft is not inflated to leave room for haggling. We scope honestly: if the floor needs only a buff, we quote a buff instead of a full diamond job, and tell you when the cheaper option will hold.

Do you take advance payment?

The package is confirmed in writing first. Advance for material is normal on large jobs; the balance is settled after the walkthrough.

Can I get a quote on WhatsApp?

Yes as an indicative band. Send photos in daylight of the dullest area, any stains and one close-up of the surface. The final figure is confirmed after the free on-site inspection.

How long is the quote valid?

Thirty days from the inspection date. Material and product rates move, so we do not hold figures indefinitely, but we will tell you if anything changes.

Is the inspection really free?

Yes. There is no charge for the site visit or the measurement, and no obligation to proceed afterwards.

Frequently asked questions

Call or WhatsApp for quick answers about scope, timing and guide rates for this service.

Let's restore your floors

Free inspection · written quote · Delhi NCR